We recommend that the dust container is emptied regularly or if it appears to be more than 2/3 full. Press the release catch at the rear of the cleaner and take the container to your dustbin and empty the contents.

HOOVER Vacuum Cleaners - Cheap HOOVER Vacuum Deals | Currys HOOVER Vacuum Cleaners - Cheap HOOVER Vacuum Deals | Currys

Remove the dust container and the top filter cover by pressing the release catch shown in the pictureand simply lift the blue filter for cleaning. The second filter is found in the lid of the duct container. First remove the container from the product by lifting the release catch on top as shown here. With only two tools supplied with the vacuum, this is possibly the most frugally equipped cleaner we’ve ever tested. Although considering many people end up using only one or two most of the time anyway, maybe it isn’t such a silly idea. If the brand you buy is important to you, our best advice is to spend some time writing up your own list of ideal brands. That way when you come to the point where you’re comparing product options you can filter to only show the products from brands in your list. The next step after looking at products in the same category, was to look at products from the same brand, Hoover.There are two filters on your Freedom vacuum and these need to be cleaned on a regular basis to keep the product working efficiently. If the cleaner loses suction power it may be that the filters are clogged and require cleaning. The exhaust filter is situated on top of the hood as shown: The 1.4m hose is flexible and feels tough enough to withstand a fair bit of abuse. At one end is a simple curved plastic handle with suction-release slider, and on the other is a pinch-clip fitting to the cleaner body. The latter proved much easier to use than some other pinch-clip hose connectors we’ve tried, ensuring this cleaner can be easily dismantled for storage. To keep your cleaner working efficiently and give maximum suction power we recommend you regularly clean the filters. This will also prevent it from overheating or cutting out. There are 2 filters on your product, the first one is found behind the bag. Open the dust box by pressing the catch at the centre of the bag cover and take out the bag. If your bag is more than 2/3 full it’s a good idea to throw it away and pop a new one in. This thing is compact. That applies not only to the Hoover Whirlwind SE71 cleaner itself, but equally to the tool and accessory count. In the box you’ll find a hose, tubes and just two tools: a small multi-purpose carpet and hard-floor head, and the ubiquitous (among cheap cylinder cleaners) microscopic combined crevice and brush tool.

Whirlwind Vacuum Cleaner Help and Advice from Hoover Whirlwind Vacuum Cleaner Help and Advice from Hoover

At first it seemed impossible to detach the bin, despite the clip releasing as it’s meant to. It later transpired that the inserted section of the hose protrudes so far into the bin that you actually have to unclip and remove the hose to get the bin out of the cleaner. No mention is made of this in the instruction manual, and quite frankly, it’s one extra stage in emptying the bin that we could do without. The cyclonic unit can be lifted out of the container as shown and cleaned by immersing in warm water along with the container. Make sure everything is dry before re assembling. Once the dust box is 2/3 full it will need to be emptied to ensure that the cleaner works effectively. This is easily done by taking the dust box off the cleaner by lifting the carry handle. The tubes bring a touch of class to this affordable cleaner. They’re a metallic-painted steel and telescopic, with a clip release and several ratchet points so you can achieve a variety of lengths. This is a better piece than the simple push-fit chrome steel tubes often found at this price, and proper sleeved ferrules at either end ensure tool attachment and removal is far easier too. The next step for us was to look at all of the products that fall within the Vacuum cleaners category, of which we found 94 products at Argos. So we pulled together all of the prices of these products to analyse the average prices as well as finding the cheapest and most expensive options.

Clean the brush roll

To remove the filter you will need to twist the lid off the dust box and lift it off. Twist the filter to remove it from the lid and separate from the mesh screen. Dust everything out but for best results wash in warm water and let dry thoroughly. Switch the cleaner on and press the brush control switch to 'on' - Push the buttonindicated in the picturewith the green arrow. (the brushes will only spin if switched on) More information on quality can be found in this old but still very helpful article from Harvard Business Review. The potent 700W motor makes its presence known with an aggressively pitched howl that’s far from unobtrusive. The thin foam post-motor filter does little to stifle air rush or motor noise, and the result is an old-fashioned cleaner sound by modern standards. Both these filters can be dusted clean or washed in warm water, if you do wash them please make sure that they are dried thoroughly before re fitting them. Clean the blue fibre filter and the spongy bit.

Hoover Whirlwind SE71 Review | Trusted Reviews

Take the container to your dustbin or place over a bin bag and press the bin empty release to open the flap at the bottom of the container. Shake the container to loosen up the dirt so that it falls out. Price is another really important factor for analysing the quality of Hoover WRE06 Whirlwind Evo Upright Vacuum Cleaner vs other products in the Vacuum cleaners category. It’s obvious, but you will need to set your expectations of quality based on your budget and the price of the product you’re looking at, against the price of alternatives. Included is a 2-in-1 dusting brush and crevice tool for effective cleaning of a wide range of surfaces, nooks and crannies. The tool can be stored on board when not in use.Equally strange is the “Max” line level on the side of the bin, which – if followed to the letter of the instruction manual – would give you the actual bin capacity of a small tea cup. During testing, we filled it way past this level (as most people will) without major loss of suction, so take that Max level as a guide. First remove the dust box and empty it out over your dustbin or into a bin bag. Lift the handle to take it off the cleaner

Hoover Whirlwind Evo WRE06 Upright Bagless Vacuum Cleaner Hoover Whirlwind Evo WRE06 Upright Bagless Vacuum Cleaner

Start by taking the dust container off the cleaner by lifting the release catch to remove the container. Remove the hand held part of the cleaner and release the dust box by pressing the button on the handle. Empty the contents of the duct container in your dustbin. Brush the fibre filter to remove dust. For best results wash the filter and the dust containerin warm water and allow to dry thoroughly before re fitting to the product.. There are two filters fitted to the cleaner that will from time to time require cleaning especially if you notice that the suction power is not good. To keep your cleaner working efficiently and give maximum suction power we recommend you regularly clean the filters. Keeping things clean can preventthe cleanerfrom overheating or cutting out. There are 2 filters on your product, the first one is found behind the paperbag. Open the dust box by pressing the catch at the front and take out the paper bag. If your bag is more than 2/3 full it’s a good idea to throw it away and pop a new one in. Now slide the yellow filter up to get it out of the rear of the bag compartment. You can clean this filter by using a brush to free it from dust and then wash it in warm water. The brand that’s synonymous with vacuum cleaning has made an affordable bagless cylinder cleaner. It boasts A-rated energy efficiency and top-rated hard-floor performance.Unclip the dust container and place it over your dust bin. Press the release to empty out the contents. The dust container and separator unit inside can be washed in warm water. Please ensure it has dried out thoroughly before re fitting. Doing this on a regular basis will keep the vacuum cleaner working well and with a good suction power. To keep the cleaner working efficiently and effectively the filters will need to be cleaned regularly. There are 2 filters on the cleaner the first of which is inside the dust box. Start by removing the dust container from the product by pressing the release button on the top of the container, place over your dust bin or bin bag and press the catch on the bottom of the container that will open the flap and allow the dust to escape. Give the container a shake to help release all of the dust and dirt. To keep your cleaner working effectively and producing the best possible suction it is important to regularly empty the dust container and keep the filters clean. Toempty the container start by removing the dust container by pressing the release button on top of the product as shown.