Keep collections to yourself or inspire other shoppers! Keep in mind that anyone can view public collections - they may also appear in recommendations and other places.

When selecting “Foliage” as material type, the Enscape Material Editor interface will look identical to when selecting “Generic” as type. Replacing current materials in the current project with materials from the Enscape Material Library is now possible from within the Enscape Material Editor.Most of the time you should avoid using 0 or 1 for your Roughness value, and instead use a value that falls somewhere between the two extremes. Texture masks are often used to add variation and noise to the Roughness value. This produces surfaces that are not uniformely shiny or dull, but some interesting combination of both. Read about texture masking here. Our portfolio of highly reflective materials is ideal for UV and lighting systems. Available in rolls, sheets, or three-dimensional shapes and various cut shapes and forms, our POREX Virtek ®PTFE materials are up to 97% reflective. You can also use this value to mimic depth of field in mirrors. Amount The shininess of the reflection. Scientific American is part of Springer Nature, which owns or has commercial relations with thousands of scientific publications (many of them can be found at www.springernature.com/us). Scientific American maintains a strict policy of editorial independence in reporting developments in science to our readers. Ensure properly disinfected air with Porex Virtek reflective media lining your UVC air disinfection product

On the far left, the sphere has a Roughness value of 0 and appears fully mirror-like. As the Roughness value increases from 0 to 1 the sphere appears less shiny. Note how the Base Color of the Material influences the color of the reflections. The Metallic-slider tells Enscape to treat the surface either as a non-metallic (e.g. plastic, ceramic..) reflective surface, or as a metallic one. C3 anti-detection film is another variant of Mylar and it is a material that has been specially designed not to let any heat trough. Because of that it can be a great addition to grow rooms that are constructed in cold climates. But you have to be careful in hot climates where you will need a lot more ventilation to counteract that heat as well as those light reflection properties. Over the years HID light has become very efficient as well as cheap and there have even been some newcomers like fluorescent light and LED diode lights that can grow cannabis plants. But what if I told you that you can get up to 30% more light from your existing light source without the need to install new lights and without more electricity costs?You can expect up to 70% reflection but usually, these are just temporary solutions while you can get something much more reflective. The Carpet material acts in the same way as the Grass Material, in that it can be applied to a horizontal surface only, and the Height and Height Variation are controlled in the Enscape Material Editor. This option can be great for large-scale sealed grow operations but for small-scale cabinet grows it usually is an overkill and it is too hard to properly attach this polymer to all the walls without cutting it in multiple places.

Foylon is a more durable version of mylar that has a reinforced laminate coating and will not tear or crease that easily. Foylon is a bit more expensive than regular mylar but it can be used multiple times and if you manage to make it dirty you can simply clean it without creating folds or bends. In this case, a Depth of 4 or 5 is typically a good value. Max Distance Maximum distance of reflected rays away from camera (Z depth) in Blender units. the more reflective a material becomes (this generally occurs on the outline of objects). Blend A controlling factor to adjust how the blending happens between the reflective and non-reflective areas. Depth Maximum allowed number of light inter-reflections. Glass beads are semi-exposed. Structure of exposed reflective material: bottom carrier layer, middle glue layer, and an aluminum layer (for imaging) plated under the glass beads.White paint is used in larger as well as smaller growing spaces and it can reflect up to 80% of the incoming light and for such a cheap price it is a great solution. The lower the Roughness value, the more mirror-like the Material will appear. When Roughness is 0, the Material behaves like a perfect mirror. Extra: Think about what else a pedestrian could do to increase his or her visibility at night . Can you test these solutions in a similar way and compare these results with the ones you obtained in this activity? Did it increase visibility more, way more or less? Katzenhalsband - "Reflektor" - Sicherheitsverschluss/Breakaway - Reflektierendes Katzenhalsband/Reflektorhalsband - Weich/Stabil/Sicher

In 99 percent of cases, you will not need to adjust the Specular input. The default value of 0.5 is suitable (and accurate) for most Materials.

Values < 1.0 give diffuse, blurry reflections and activate the settings below. Threshold Threshold for adaptive sampling. Again, you can also use 2D Images as a ‘Roughness Map’ to control the roughness value per location on your surface. In Fig. Demonstration of the Fresnel effect., this behavior is demonstrated for a perfectly reflective Material