Unless your fermenter is pre-drilled, to attach the little bottler you will need to drill a 25mm hole in the side wall, with the centre of the hole approximately 35-40mm above the base. When the wand touches the bottom of your bottle and the spring loaded valve is pressed, your Beer / Wine will flow. We will replace the goods free of charge, including postage, or give you a full refund of the item(s) if preferred. The bottling wand prevents foaming as you fill your bottles, leaves no mess and makes bottling solo an option rather than requiring a bottling assistant! Simply Turn On The Lever Tap, Insert The Tube Fully Into Your Bottle, When The Valve Hits The Bottom Of The Bottle The Brew Flows, When The Bottle Is Removed The Flow Stops.

It is wholly in the ownership of Jeff Bowman, a life-long Wine and Beer Maker, who's experience guarantees your access to expert advice. One happy Little Bottle user states that his bottling filling time, using this device, for 40 x 500ml bottles, is now reduced to 16 mins! A pre-drilled 25 ltr brewing bin, complete with a little bottler, which can be used as a bottling bin when making beer or 30 bottle wine kits. Our Highlands and Islands deliveries are sent via Royal Mail or Parcelforce and usually take 2-4 days from dispatch.If you fill your bottles right to the top, when you remove the wand it leaves perfect spacing for your Cork, or head room for Secondery Fermentation in Beer bottles ect. Use it to fill most size bottles effortlessly from a fermenting bin, no more need to suck on a plastic tube to start the flow and risk disturbing the sedement at the bottom whilst bottling beer or wine. Please do not worry about live cultures please see the guide below for how long they can be in their packaging. Items must be in a new and unused condition, complete with all packaging in the state in which it was delivered. A superb device to make it easy to transfer beer or wine from the fermentation vessel to your bottles.

In the unlikely event that something has gone wrong, or you've changed your mind we're here to help. The Little Bottler really is the must have device to make tedious bottling methods a thing of the past. Brewbitz has been supplying homebrew equipment and ingredients to homebrewers around the UK since 2012. If you believe your item is lost/not delivered/incorrectly delivered, you need to provide specific evidence.Ideally this should be used over a drip tray as, inevitably with this sort of product, small drips will occur. All sizes and measurements are approximate but we do try to make sure that they are as accurate as possible. If you do this, you will need to prime each bottle separately and will also need to extend the maturation period as there will be less yeast in each bottle to carry out the secondary fermentation that provides the carbonation. If the item has been stolen from a secure location or by a neighbour this will need to be reported to the police.

The outside of the brewing bin is normally marked in both litres and gallons as recipes and beer kit instructions tend to use pints and gallons whilst wine kits tend to use litres, however the graduations are for guidance only and should not be relied upon to be absolutely accurate. Gone are the days when you lost a lot through spillage now that is a thing of the past thanks to this bottle filler.Brewingathome supplies a huge range of homebrew beer kits, wine kits and brewing accessories, and is a completely independent online supplier, not connected in any way with larger commercial enterprises. Alongside all the equipment and ingredients, take a look at our recipe section for some inspiration and our blog pages for lots of great brewing tips and guidance.

The Little Bottler consists of a dispensing tap which can be used as usual, plus a detachable filling tube. If it still cannot be located contact us on 01323 730091 (Mon-Thursday) and we will get that investigated. To fit to a vessel drill a 25mm hole, drill it high enough up from the base so that the backnut can be fitted to the inside of the vessel. Comes complete with an on/off tap which has a nut and a washer (which fits between the outside of the bucket and the front of the tap), and requires a 27mm diameter hole in your bucket.Please ensure your address details and contact details are correct as once Royal mail has issued charges we cannot get them refunded. We will try our best to amend address's where we can but we cannot always guarantee that we will be able to. Using this method works quite well because it spreads both the priming sugar and the yeast more evenly throughout the brew and can help to produce more consistent conditioning across the whole of the batch. This innovative device makes it easy to bottle your beer, wine, or cider quickly and without any mess. If we do not receive photographic evidence of the damage we will not be able to process a claim and therefore will not be able to offer a refund/exchange.