EASYJoint results in a strong paving joint that withstands the elements, and lasts for years, what’s more the solid joint eliminates weed growth! EASYJoint brush in paving grout can be used whatever the conditions are, it’s suitable to be used in wet and rainy weather. Easyjoint can be used in wet or dry conditions and is sold in a 12.5kg tub which will cover an average of 7m² depending on slab size and joint width. The end results will be a perfect joint that is fully filled without need for kneeling and compressing the material by hand that will last for years and years. EASYJoint can be installed dry, however to use this method the paving must be sealed at least 2 - 3 days before the EASYJoint application. The paving slabs must be sealed on five sides (the top and four edges). When applying dry, EASYJoint compound must be compressed, by striking off with a pointing tool into the joints as it will not self-compact in the same way it does when applied with water. Maintain the Width of Joint Throughout. Maintain at least a 3mm gap width throughout the depth of the paving material. Never have this type of paving butted together. See photograph.

Utilise the same method when working with porcelain paving tiles as with working with stone or concrete. The base on which the porcelain is laid must be able to drain. If the base is non-permeable then EASYJoint Pro or EASYGrout should be used. It is also worth pointing out that because dirty surface water can drain through the joint, over time it will result in a visual change to the EASYJoint colour. This is entirely natural; it is not a fault and it will not impair the integrity of the product. Yes, theoretically EASYJoint can be used below 3 degrees down to freezing conditions, however in these conditions, the use of lots of water becomes more difficult with a greater risk of staining. Where possible avoid using below 3 degrees, use with caution. Does EASYJoint stain paving slabs?

If heavy or prolonged rain is forecast, it is ideal to wait for drier conditions as heavy rain may disturb sand particles in the EASYJoint mix before it cures solid, giving an uneven texture. Prolonged rain will also extend the curing process. Whilst following the instructions carefully, if you do happen to make an error with EASYJoint, don’t worry, the only stain or picture framing that the jointing compound may potentially leave is linseed oil which will disappear and fade over time. By using lots of water when brushing the product in, it will ensure that any linseed oil will sit on top and simply get washed away! Detailed instructions on how to joint paving with our sweep in sand can be found inside the EASYJoint tub. The original jointing compound for all weather paving. It can be used rain or shine, at any time with an oustanding finish. Tiling Adhesives & Grouts We offer a range of tiling adhesives, grouts & silicone for installing porcelain, glass, cement, marble, mosaic, granite and limestone tiles securely to your walls. Our tile adhesives and grouts are heat, mould and water resistant and perfect for fitting tiles in your bathroom or kitchen. Always fully wash off the oil residue until you can no longer see a film on the water, ensure any material is swept of and no left to set on the paving.

Available in different colours, EasyJoint holds up well against weathering and is incredibly long-lasting on joints that are 3mm wide and over. Once opened, the remaining product can still be used, in turn reducing waste and making the most of your money. Floor Levellers & Preparation We offer a range of single & two-part flexible, reinforced and deep fill floor levellers, bulking concrete, primers and vapour suppressants for preparation of your subfloor prior to tiling or laying floor coverings. EASYJoint is a very effective, super fast and aesthetically pleasing way to fill/complete joints between paving materials including slabs and pavers for example. Zero Waste – Opened tubs of EASYJoint, if not fully used, can be kept for later use providing they are covered by a minimum of 2″ (50mm) or more of water EASYJoint is the original sweep-in all-weather jointing compound and still the best truly "All Weather Paving Joint Compound". Do not be fooled by other paving jointing compounds making similar claims. Azpects sells tens of thousands of tubs of EASYJoint every month to satisfied customers all over the Europe and North America.Tarmac & Pothole Repair We offer a range of permanent pothole repair & pothole filler materials such as Ultracrete Permanent Pothole Repair, instant tarmac including Ultracrete Instant Road Repair 6 & 10mm, cold joint sealants, line marker paints and anti-skid patch repair. Ideal for use with natural stone, limestone, porcelain, Yorkstone, Indian Stone, granite setts and concrete paving slabs Both the bedding and sub-base must be permeable. When using a mortar bedding mix, this should be no stronger than 6:1 (sharp sand: cement). Be careful when using add-mixtures such as SBR or PVA as these can seriously affect the permeability of a mortar mix. Heavy Traffic Pro Jointing Mortar - 2-Part Epoxy Resin Mortar System - suitable for vehicle areas up to 7.5 tonnes