As you can see, the latter two options use 40MHz channel width, which is effectively half the bandwidth of the 80MHz default. This reduces the chance of interference, though, so it might work for you. Get a Sky Q Booster Mesh networks are often slower than a traditional network, but add reliability and boost overall coverage. For Sky Q, the latter points are the most important, as you only need enough bandwidth to stream HD and reliability is more important than speed. How the mesh network works depends on whether you have Sky broadband and a Sky Q hub, or a regular broadband connection. Please be wary of advice about disabling the 2.4GHz network, though. Press the WPS button on your WiFi router, then press the WPS button on the Sky Wireless connector MINI I’ll show you how to set Ethernet up on the main box, but I’m not going to cover how to make your entire system Ethernet-based: this is a specialist setup for when there’s a massive issue with getting wireless to work properly and should only be done by a Sky engineer. 1. Connect your main box So, now let’s get to the juicy stuff. The real reason you’re here. How to connect your Sky box to WiFi without the WPS button.

Sadly, while you can force a Mini box to join your home wireless network it can only do so on the 2.4GHz band, which isn’t fast enough for streaming live TV, so don’t do this. So, say goodbye to tangled cables and embrace the freedom of wireless connectivity with the Sky Wireless Connector. It’s an essential accessory that enhances the viewing experience and makes your entertainment journey even more enjoyable. FAQs Step 6:Once your Sky Q Mini Box has connected to your main Sky Q TV box or router, you should be able to access live TV and other features in any room with a connected Mini Box. Sky Mini Box Dimensions / Specs By using a Sky Wireless Connector, you can enjoy seamless and convenient access to on-demand content, including catch-up TV, movies, and sports programming. It also allows you to remotely control your Sky box through the Sky Go app, providing flexibility and convenience for managing your entertainment setup. The light will now flash amber. Once the two devices are successfully connected, the amber should change to dark amberOn the downside, however, one of the biggest downsides is that you cannot record directly onto the Mini Box. However, you can use the box to record content on your main Sky Q box and stream or watch the content later on in the Mini Box. One of the main pieces of advice in the forums is to disable the 2.4GHz modes on the Sky Q Mini boxes. This forces the boxes to use 5GHz networking, which sounds great, but you shouldn’t have to do this at all. In fact, in a properly set up Sky Q system, all streaming is performed over 5GHz, and 2.4GHz is only used for Wi-Fi hotspots, as a failover and for some updates. In other words, streaming problems are not caused by the 2.4GHz network! Pull out the tab on the Sky Q box and plug an Ethernet cable into this, then run the other end of the cable into your router (Sky Q Hub or otherwise). Go to Settings, Setup, Network, Advanced Settings and select the ‘Connect to your router using a wired connection’ option. If you have a Sky Q Hub, you’ll be asked if you want to use your box as a Wi-Fi hotspot. We recommend that you select Yes, unless you have a really good reason not to. If you don’t have a Sky Q Hub, your box’s wireless connection will be disconnected. This method is not only easy but it is convenient. Choosing to go wireless means you will have fewer cables trailing around the house, especially if your Sky box and the wireless router are in two different rooms. To start this process, simply press the WPS button on your router, then press the WPS button on your connector, to connect the two devices. Detailed steps are below.

If this doesn’t fix your problem, then you can phone Sky and talk to them about getting a Sky Q booster. Much like an additional satellite in a mesh system, a Sky Q booster gives another repeater in the system. You need to connect your main Sky Q box to your Hub properly. To ensure there’s a connection, go to Settings, Network, Setup and select Reset and then Confirm. Follow the onscreen instructions to set up your main box, connecting it via the WPS buttons on the router and Sky Q box: press the WPS button on the router for a couple of seconds, and then press the WPS button on the Sky Q box for a couple of seconds (it’s the button on the far right).Step 1:Plug the Mini Box into your TV using an HDMI cable and plug it into a wall outlet for power. For a cost, there is an extensive range of films offered, significantly more than the limited options (Anytime) that are offered without the On Demand Connector.