It seems obvious, we know, but it’s a common question people are asking via Internet search engines. And it’s a question we are asked by customers when they are looking for a glue gun from our range. With these guns you get the best of both worlds, but this feature does come with an additional cost.

The lower temperature glue guns are more suitable for more delicate items such cloth/material, paper, card etc. These guns tend to be used more by hobbyists and those involved with arts and crafts.With the nozzle hovering over your drip mat, gently squeeze the trigger until glue starts to flow. The flow should be smooth and consistent, if not, there may be an issue with your gun. Apply some gentle pressure to the trigger until the glue starts to flow freely, at which point move the gun along the length of the surface, easing the trigger off as you approach the end. Pop the gun upright on the stand that was provided and then turn it off at the mains and (wearing gloves as the nozzle is hot), wipe it over with a paper towel to remove any and all surface glue.

Yes, you can use a low temperature glue gun on balloons without popping them, making it a suitable tool for various balloon-related decorations. Low temp glue guns operate at a lower temperature compared to high temp glue guns, which makes them safe and easy to use on heat-sensitive materials like balloons. Why buy from gluegunsdirect.com? After use, on some occasions, excess glue can collect on and around the nozzle. In most cases when you next use it, the heating up process will melt this glue so it shouldn’t cause an issue, but if large amounts are present, wear some sturdy protective gloves and use a damp cloth to wipe the excess away.

FREQUENTLY ASKED QUESTIONS

With everything now prepared it’s time to apply some glue. Before applying the glue straight on to any surfaces it’s a good idea to do a test first. During use: Use the gun in a well-ventilated area to avoid inhaling glue vapours. Make sure it has a stable stand to rest upright when not in use, and don't rest it on its side. When the gun is switched on, focus on the glueing task and do not look away unless it's rested securely. If you need to leave it unattended, switch it off at the wall.Never use a glue gun tilted upwards or overhead. In the case for the gun we are using in this example, the manufacturer states to leave the gun for 5 minutes, but as mentioned, refer to your manufactures user manual for specific times.

Working in a well ventilated area is also very important. Under normal operating conditions both hot and cool melt glue should not be dangerous, but if overheated then toxic vapours can be released. Any tool handled carelessly or incorrectly can cause painful and sometimes permanent injury, and a glue gun is no exception. With that in mind, please take a minute to read this safety advice for the next time you or a loved one uses your new glue gun. Most glues should have set enough to allow you to move the object you’re working on, but if you can, allow 12 hours for the glue to really harden off.Also, ensure that your work surface is flat and level. The support stands that come with most off the shelf glue guns aren’t that great and can easily topple over if not resting on a level surface, and you certainly don’t want that happening when it’s turned on and up to temperature.