Use the brush or rag to scrub off any remaining residue on the chain. It may be helpful to use old toothbrushes to get into small crevices. Unlike mid-drive motors, which are connected to the same gears and drive chain as the pedals (remember, they are situated in between the pedals), hub motors are entirely separate from the drive chain connected to the pedals.

Shimano also makes a Linkglide chain that is designed for use with electric bikes with 10 or 11 speeds, although it can be used with its Hyperglide drivetrains as well as the ebike-specific Linkglide. This has a different link shape, designed to handle the extra power provided by the electric motor. Some cyclists can change a bike chain in no time at all while others struggle with it the first few times. Using and installing a bike chain shouldn't be difficult but don't get too frustrated if it is at first. Now that your chain is removed you can easily and accurately size the chain. As we mentioned above, the easiest way to determine the length is to lay it next to your old chain. Keep in mind that older chains may be a little loose, depending on how badly they need replacing. Some cleaning products can be corrosive or otherwise damaging to surfaces such as wood or marble. Always make sure to do a spot test before applying any product or solution to larger areas. A:Regular cleanings are crucial for optimal performance in maintaining your bike's chain. How often you should clean your chain will vary based on factors such as the type of terrain you frequently ride on and the number of miles you put on your bike, but as a general rule of thumb, aim to clean it at least once every few rides or every couple of weeks.

10.000km+:

Keep in mind when you get a new bike chain there's a good chance that it's going to be too long for your drivetrain as is, so you need to know how to size a bike chain. Sizing a bike chain can feel like a bit of a process, particularly if it's your first time.

While you can tighten a bike chain on your own, it may be easier if someone else can give you a hand. If the chain keeps falling off or can't hold the tension, it's time to think about getting a new chain. When To Replace Your Bike Chain Replace your chain when necessary. Over time, even with proper maintenance, chains will eventually wear down and need to be replaced to maintain the optimal performance of your electric bike. Additionally, replacing your chain before it breaks can also save you from potentially damaging your bike's drivetrain. Regularly clean and lubricate your bike's chain. Debris and dirt can cause wear on the links, so clean off any grime after every ride. Use a specialized lubricant to prevent rust and ensure the smooth operation of the chain. It’s not required. Since a hub motor’s drive system is independent of that of the pedals, you don’t really need any kind of special chain. However, you must ensure that the chain you are getting is suited for the number of gears your bike has. What Kind of Chain Is Best for Your E-Bike?

In the past, chains of the same speed could typically be mixed between manufacturers, although this is generally not the case as you head up to modern 11-, 12- and 13-speed chains, where the designs are often more specific to the brand.

While we already mentioned the importance in keeping an eye out for signs that you need a new bike chain, there are ways you can prolong the life of your bike chain. The most common bike types are road, mountain, and BMX. While each bike requires the use of a bike chain, one chain may not be suitable for all bikes as there's no "universal" bike chain.Although all bike chains serve the same purpose, there's no such thing as a universal bike chain (as there's no universal bicycle). Here are things to remember when selecting a new chain for your bicycle. Number of Speeds Taking your chain off the bike to clean it may seem like a hassle, but it is the best way to ensure a thorough and effective cleaning. By removing the chain, you can give it a proper degreasing bath and make sure every link is cleaned. You will also have access to all sides of the chain for scrubbing instead of just being able to clean one side at a time while it is on the bike. In other words, while a mid-drive motor works TOGETHER with the pedals to power your bike, a hub motor works entirely independently. So, if your hub motor fails or the battery runs out of power, you can use your pedals to continue pedaling the bike. If you are tired, you can power your bike from the power of your motor alone.

Wipe off the excess degreaser with a clean rag and allow the chain to dry before reassembling. Remember to apply lubricant afterwards for smooth operation. And there you have it – a sparkly clean bike chain! To accommodate the extra freehub width with the same distance between the rear dropouts, that’s meant that the rear wheel has been ever-more asymmetrically dished. That’s gone about as far as it can, which is why Boost spacing has taken off in mountain bikes to even out rear-wheel geometry.

A mid-drive motor is not only more expensive but also requires more maintenance. Also, you will have to learn not to shift gears when you are not in motion. A half-link chain is easier to adjust and can be done with more accuracy. Best Bike Chain Size Chart