Simply fit this module into any Ei3000 series alarm for wireless interconnection with other compatible devices, data extraction and real-time notifications of alarm events and activations via the SmarkLINK Gateway and Portal. The house coding feature confines the RF communication to designated RF devices only, thereby avoiding the inadvertent activation of neighbouring Alarm RF systems. The Ei3000MRF is a short-range device which uses a transceiver to receive, transmit and repeat the RadioLINK RF communication protocol. This ensures a robust "mesh" of RF signals and reliable paths of communication. The integrated house coding feature restricts the RF communication to designated RF devices only which reduces interference / activation with other nearby RF systems. The Remote Alarm Learn entry feature allows the installer to re-activate the entire RF system house coding from one device. Additional devices can then be added and house coded accordingly. Add this module to any Ei3000 series alarm to enable SmartLINK interconnection and device data extraction

The Remote Alarm Learn entry feature enables the installer to re-instate the full RF system house code from a single device. Additional devices can then be added to the system and coded accordingly.The Ei3000MRF is an optional add-on SmartLINK module for the Ei3000 series Alarms. It enables the Alarm to communicate wirelessly with other Ei Electronics RF devices. Up to 12 devices can be interconnected. It also facilitates a hybrid communication of hardwired and wireless connections. The Ei3000MRF is an optional add-on for use with the Ei3000 series of alarms. It enables wireless interconnection with up to 12 other SmartLINK / RadioLINK compatible devices and supports hybrid communication allowing for devices to be hardwired or wirelessly interlinked. The Ei3000MRF module is a short range device using a transceiver to transmit, receive and repeat the RadioLINK RF protocol. This ensures a robust “mesh” of RF signals and reliable paths of communication.

The module simply plugs into the designated slot in the base of the Alarm head. On powering up the Alarm, the RF LED on the side of the Alarm will flash red, blue and green to indicate that the module has been fitted correctly.