Button holes can be made using a standard round drive punch, then cutting a slit below it with a knife. Duologi is the trading name of Specialist Lending Ltd, which is authorised and regulated by the Financial Conduct Authority (register number 774712). A basic leather punch relies on leverage to push the cutting edge of the punch through a piece of leather. First, place the hard surface on the work surface, then put the cutting mat/board on top and place the leather on top of that.

Actually, the tool is made in Germany, of reliable stamped steel, being amazingly top-quality and well-built. Cutting these each by hand can become very, very time consuming, especially with more intricate patterns. They have a solid steel hitting end, and a cutting end with several, usually about 6, small, round punches mounted in a generally circular pattern. Double lever allows you to punch through difficult materials even if your hands are not very strong. A hard surface such as a piece or slab of granite, a chunk of mild steel, or a thick hardwood board, a thick cutting board, and a plastic mallet are also required to use a drive punch.

For tough to reach angles, a smaller strop can be used, where it’s able to reach the cutting edge while also being manageable to handle. Oval punches come in a variety of sizes, offering many options to ensure the crafter has the size that is most helpful the the type of project and work that they are doing. The punching surface is generally circular shaped and rotatable, with about 6 differently-sized holes of differing sizes. For certain materials, it will be helpful to use an extra piece of thick paper, like cardboard to help protect the hole punch from the brass anvil with the tool. These are used to place decorative holes in something like a multi-layer belt with a contrasting color background that makes the hole stand out visually.

When you need an additional eyelet in your sheepskin belt, you can easily make it by yourself, spending only several minutes and without any issues.They are more expensive but, in the long run, you will save money because separate tools cost more than the ones in the sets, even if they have the same brand label. Usually, you can push either of these awls by hand through the leather; but if the leather is thick or very tough, you can force it through with a mallet and send it a few taps.

A round drive punch is set onto the leather it will cut, then hit or “driven” with a hammer, mallet, or maul. Some of our partners may process your data as a part of their legitimate business interest without asking for consent. Drive punches have the versatility of punching a hole anywhere on a piece of leather of any thickness.Having the standard composition, with 6 different nozzles and a wheel, the leather puncher is extremely handy, thanks to the long, cushioned and well-designed handles. Trace punches are most popular for harness work, though can be useful for a variety of cutting/punching needs based on their unique shape. Then place the punch on the leather, cutting side down, and strike the striking end with the mallet. They are available is different sizes so the proper size can be selected based on the needed sizes of the hole and the button stud hardware that will be used. For this, a thin, sharp pocket knife would perform easier than a bigger weapon, but eventually, you have to use what you’ve got.

A rosette cutter, sometimes referred to as a concho cutter, is a type of metal punch that cuts rosette shapes out of leather.Machine Mart Limited is authorised and regulated by the Financial Conduct Authority, register number 703528 and acts as a credit broker and not a lender.