I start googling for guides on how to replace the bulbs and literally only found one guide, which actually requires you to remove a bunch of crap including the grille and headlights. :banghead: I decided I wanted to change the OEM Factory Bulbs out for higher Kelvin ones for a whiter light output.

Built-in cooling fan for FASTER heat dissipation, 30% cooler than standard, ensuring secure temp range FOR VW Golf 7 MK7 Xenon Headlight Auto Leveling Range Headlight Cornering AFS Wire/cable/Harness Xenon Lamp LED LightLatest solution for the Golf MK7 has finally been released exclusive to Xenon Bulbs Limited Brand G3 Usual 'how to' rules apply - this is just a guide. If you are at all unsure of what you are doing, get it done professionally. The modules have firmware specific to the type of light they are being used on (in case you source your parts second hand like I did) When you are facing the same way as the car is facing, the steering wheel is on the left side, that means your car is the left-hand drive.Vehicles from North America are usually the left hand drive models.

https://www.vland-official.com/products/vland-for-vw-golf-7-mk7-mk7-5-sequential-led-tail-lights-2013-2019-yab-gef-2035?_pos=1&_sid=c98c4661c&_ss=r This item has the same connections and wires with the original headlights. It is easy to installing (Professional installation recommended). The other time I saw this, was when I was trying to figure out the proper combination of firmware for the modules 29, 39, D6, and D7 (my modules came from different vehicles). If you go to any of the headlight modules [29, 39, D6, D7], under live data, there is a field called "Head lamp variant", VCP shows a longer number but OBDeleven says "e052" for Control module and Via CAN. Is that what shows up for you? There are 3 versions of the LED lights, 8IT, 8IU, 8IX (US version with amber reflector are based on this model) Advantages: Better light cut off and brightness. The adjustment for the lights (up/down, left/right) is incorporated in the design. EXCEPT that the instructions and video do not cover this at all! These adjustments work very well, so there is no need to play with the main adjustments on the rear and side FIXINGS. I suggest that before fitting, you current light pattern is drawn on a wall or garage door, so that you can realign the new lights correctly and easily.Hey guys, I couldn't find a good guide on replacing Bi-Xenon Bulbs on a mk7 GTI so I decided to make one myself, Cheers! :beer: The lights are very good quality and work well. The ABD installation video is INCORRECT, there is no information regarding how to route the battery wires - this is crucial as there are few (one?) route that works sensibly. It is best to use this following video to help installation: https://www.youtube.com/watch?v=OSwj6QX8hKk When 4B is coded, clear all errors on 29, 39, D6, and D7. Clear errors on 4B, headlight basic settings should still be an error. Thanks to long-life high-performance LEDs with intensive brightness, they score with up to 200% more light 1), impress with up to 100% whiter light 2) and are characterized by a lighting range that can reach up to 200m. In addition, thanks to modern light guide technology and modern diffuser material they convince with a homogeneous light distribution and pixel-free optics. All these aspects result in the possibility of an improved perception of your vehicle and consequently an increased safety in road traffic. OSRAM also offers a 2-year guarantee 3) Bi Xenon Projector ball low and High beam, dual U-shaped LED daytime running lights and LED turn signals

Please Note: on some MK7 Models the DRL will turn off when the dipped low driving beam is turned on (this is down to individual cars and not general) so we have a solution for this - we supply a simple coding sheet that will allowthe DRL to function whilst the dipped beam is activated. One headlight was sourced from someone that said it was new but never installed. It had the proper modules attached. I'm no sure if new lights ship this way so please confirm. Due to transport and storage item may have marks or scratches which is not clearly visible on the pictures so please message us of any defects before installFantastic product - Get rid of that dated yellow DRL and give yourself a super bright Flash at the same time. N10708601 - Screws for the modules (I got some from Lowes that have the same thread and cut them to size) Tested OSRAM quality according to DIN EN ISO/IEC 17025The OSRAM LEDriving headlights has been tested in our DIN-certified environmental simulation laboratory for extreme external influences in terms of water, dust, cold and warm temperatures, UV light and permanent vibrations and validated with the IP protection class IP69K. These Lamps arePlug & Play will fit your car with no wiring needed or coding they will fit your cars existing headlight plug. For the Mk7 GTI, you need D3S size Xenon bulbs, BTW it uses one bulb for lows and highs, hence the name Bi-Xenon.