If you have not received your product after this period of time, you are entitled to a full refund after inspection by post. Upgraded Lattice Glass Equipped: Unlike old printing hotbed, LK5 Pro uses lattice glass plate, which has a microporous structure, which not only makes the model easier to disassemble but also makes the hotbed flatter, provide better printing effection. This Printer not only fits the bill with a large printing bed, but even with just a basic extruder, gear system, and a single fan, it pulls off AMAZING prints if you level it correctly and have good settings on Cura. inch full-color touch screen and integrated with a better friendly user interface for better interaction with the printer, simple operation, and an easy approach to checking the printing process.

The working temperature has been defined between 10 and 30 degrees Celsius, with 20 to 50 percent relative humidity. Watch during printing and see if the nozzle is stuttering (suddenly slowing down then speeding up again) along these curves. There are a number of places (especially on the cabin) where some walls are inset relative to where the wall was supposed to be, and where it's present in other layers. The Longer LK5 PRO is packaged well with thick pink foam and has been cut to ensure minimal movement.I also wanted it to use to make positives for sand molds to cast aluminum and I can't wait to try it for that. And its large-format capability also With its addition of a z brace giving it a triangular structure this can help you print faster without the loss of quality. Being a professional 3D printer, the LK5 Pro is equipped with a high-temperature resistance Teflon tube to stand up to 280℃. The key difference from traditional printers is that you have the three dimensions and can create products, elements, and parts in all three dimensions. It is better to stand higher temperatures and not easy to soften to reducing nozzle clogging, and this would increase printing quality.

It combines simple design with impressive quality claims like quiet operation, reduced nozzle clogging and printing speeds up to 180 mm/s (though 60-80 mm/s is recommended). LONGER LK5 Pro is a large affordable 3d printer with a 90% Pre-assembled, printing size of 300*300*400mm; With dual inlined rods to hold the z-axis as a steady triangular structure for a better quality of 3d printing.That was just a small quality control problem that can quickly be resolved by rotating the fan duct towards the nozzle. The LK5 PRO is integrated with 3kits of TMC2208 chipsets for the X / Y / Z axis for quiet printing, which will be reduced noise from the motor.

The Spool holder on the LK5 Pro is now located on the lower left-hand side of the 3D printer with an angle that is more direct to the filament sensor and extruder, allowing the filament a more direct passage. All I know about the printing conditions was that I was printing at 230 °C nozzle temperature with 60 °C bed temperature. Quite happy with the print quality, therefore i have attached a string to the tail and hanged it on one of my trees outside.I bought it to make molds for bushings that are not available from polyurethane and it has made a number of them already.