The included saw blade has a diameter of 260mm, a 30mm bore and the tips are made from tungsten carbide which makes it ideal for cutting through wood, laminates and plastics. This product is sold as one mains powered table saw and a saw blade. The 1500Watts motor works on 240V. It is potent as it produces more speed. More power means more speed. That reduces your working time as the machine works faster. Rotations per minute Toolden Limited (Company number SC453454). Registered office: 1 Esslemont Estate, Ellon, AB41 8NW. Credit subject to status and affordability. Terms & Conditions apply. Toolden Limited trading as Toolden is a credit broker, not a lender and is authorised and regulated by the Financial Conduct Authority (FRN 654671 ). We do not charge you for credit broking services. We will introduce you to Finance available from a number of our partner lenders. For me the MLT100 is a good choice, I can’t afford a professional saw and I don’t have enough very much space. The blade has a 40 tooth Tungsten carbide-tipped blade. The blade diameter is 260mm. It has a decent size that makes it powerful enough to cut through large piles. Max cutting depth

Makita MLT100N 240V 260mm Table Saw The Makita MLT100N 240V 260mm Table Saw is a high-performance corded power tool that will benefit professional carpenters and kitchen fitters. Powerful 1500W motor and TCT saw included. For many professional woodworkers, their table saws form the cornerstones of their woodworking operations. There is almost no vibration on the blade and the measurements printed on the saw are close to spot on. Rufus, the Woodwork Junkie mascot reminding you SAFETY comes FIRST! Power tools can be dangerous if not used correctly. The 1650 Watt motor makes 4800 rotations per minute. It is powerful enough to increase the speed of the machine. That is why it makes you complete a task in a short period. Pinion fence railsHi Jean, First of all, thanks for such detailed review. Do you know if its possible to use the throat plate that comes with Makita 2704 in the MLT100? If it is, it would be an outstanding improvement, considering that, in my understanding, the plate of 2704 is completely of aluminium. I don’t know the exact measures of each plate. Considering the cost-effective component of this saw’s development it’s no surprise that it is not without its flaws and while cutting is when you will notice most of them.

The maximum cutting height at 90 degrees is 93mm. When it is at 45 degrees, it runs up to 64mm. Amp motor The fence of the Makita mlt100 has alignment problems, whereas the fence system of 2704 is accurate. The maximum cutting depth of the Makita mlt100 at 45 degrees is 64mm, and at 90 degrees, it is 93mm. When at 45 degrees, it runs up to 64mm. Similarly, the maximum cutting of the Makita 2704 at 90 degrees is 93mm.

Makita 240V 260mm Table Saw MLT100N

Please note this product will require a Pallet Delivery Service, please allow an extra 2-3 working days for estimated delivery. Walking into a store the MLT 100 will definitely draw your attention. Largely covered in the brands signature blue, you don’t need to be a power tool connoisseur to be able to identify this saw from across a room as a Makita. The Makita MLT100 is eye-catching with its blue color and branding. It replaced the Makita 2704 as it is cost-effective. The 960 x 690mm bed is significant as the main bed. The slide bed of aluminum makes it durable. The main feature of the Makita 2704 is the powerful 1650 Watt motor. It has high rigidity that makes accurate cutting possible. The table is extendable, and the fence gives you a large cutting board. It has easy scales that help you prepare your cutting pieces of equipment.

The Makita mlt100 is cost-effective compared to 2704. The mlt100 is under 700 whereas 2704 is almost 1000. Verdict on the makita 2704 vs mlt100 The machine rotates from 45 degrees up to 90 degrees. At 90 degrees, it can go as deep as 90.5mm; at 45 degrees, it is 63mm. The bevel cutting capacity amounts to 0 to 45 degrees. 10-inch blade The rip capacity has a sub-table that can accommodate an 8×4 ft sheet. It complements the overall machine. 10-inch blade The height adjustment action is of the smoothest and most effortless that I’ve experienced on a saw in the MLT 100‘s price range.

As for the Makita MLT 100, like I said, its a nice saw for the price but don’t expect miracles. It will never measure up to some of the more expensive saws. The blade can sit at a 90-degree cutting angle and cut down to 93mm. The angle is adjusted from -0.5 to 45.5 degrees. When it is at 45 degrees, it goes down to 64mm. Accurate cutting The angle adjustment knob allows for adjustments to the blade angle in smaller increments making fine, accurate adjustments a simpler task. Cutting

Several features make the table saw accurate. The tabletop is super flat, which makes it precise. The T-slot miter gauge secures the workpiece. The rip fence is smooth and precise. Similarities For hobbyists, the situation is very much the same with the only real difference being that as hobbyists, we try and scale down a bit from the large, high powered cabinet saws often used by professionals. Sadly, I have no solution to the throat plate dilemma. I have considered making a replacement but there is a small strip underneath the insert which would require any replacement to be really thin in that area. I have seen people make replacement plates but I wouldn’t be able to say how safe and effective they are. As a global supplier of a comprehensive range of tools for creating comfortable homes and living environments,Two pole slide system for raising and lowering blade for the most efficient and smoothest adjustment of the blade depth But I agree about the fences, they need modification and that bloody throat plate was the first thing to go. The fence makes the task accurate. It makes the operation smooth. The adjustment mechanism it comes with allows you to have accuracy when cutting. Blade angle Hi do you know what the difference is between the mlt100 and the mlt100N besides the different size blade 255/ 260 ? Taking the saw out of its box, with the exception of some fine-tuning to the blades set point, the only assembly required before the saw can be used is fitting the riving knife and clipping the blade guard into place.