One of the most obvious differences between these two routers is their depth adjustment system. The Dewalt makes use of a “ring” system, wherein you twist a large ring that’s wrapped around the body of the router. The Makita, on the other hand, has a knob that you twist to fine-tune your depth adjustment. Inclusions BT//FX Drill Bit Holder - DeWalt Bit Holder, Cordless Tools, Impact Drivers, Drill Accessories, Replace Magnetic Holder Amps measure how well a motor cools itself. Overall, the higher the rating, the better. In this case, the DeWalt DWP611 has a better amperage than the Makita. It has a number of really useful features including a soft start, led lighting for the work space, easy to use depth adjustments, and the two routers are easy to swap over, using the same base. And i doubt that the one you buy from the USA will work on 240, they are obviously 2 separate products with a single manual (the one shared).

One of the defining features of a compact router is that it doesn’t have handles—hence its other name as a palm router. This means you can fit into the tight spaces, but it also means that you’re holding the body of the router itself. You don't have permission to access "http://www.homedepot.com/p/DEWALT-7-Amp-Corded-1-1-4-Horsepower-Compact-Router-with-Plunge-Base-and-Bag-DWP611PK/203054747" on this server.This is awesome. I so want one of these X-Carves but I just can’t begin to afford one. I’m sure the DWP611 makes a good spindle though. I have one I use as my day to day go to router and it works really good. Shop-Vac brand universal tool adapter 90687 fits the dust collection attachment. It must be cut to fit. Use sections 2 and 3 as shown in attached pic to adapt to a 1-1/4” Shop-Vac hose.

To remedy this problem, I used some velcro wire-wrap and simply wrapped the 611’s power cord around the drag chain ever four to five inches. That seems to work out fine. The DWP611 has a large opening on one side of the body to allow the dust and wood chips to eject from the machine. Unfortunately, this opening is big enough for several fingers to slip into and it is very close to where you hold the machine.It is a superb quality unit and there's little doubt that it can do any routing job that you will ever need, as well as lasting a lifetime. I wasn't happy with the edge guide that DeWalt makes for my DW618 routers, and the DNP611 one for the DWP611 is just a smaller version of it. I now have and use a CRB7 for all of my router jig needs when using my DWP611.

Upgrading the X-Carve to the DeWalt 611 is breeze and only takes about 10 minutes to accomplish. In fact, it took me more time to read the directions than to actually do the upgrade. The Makita RT0701C wins again in this area. At 3.9 lbs., it is lighter than the DeWalt, which, in comparison, is 4.6 lbs. Amps The compression springs and wing screws are available through servicenet.dewalt.com. They do not come with the plunge base but make nice original equipment additions for adding shop made or aftermarket edge guides. Use two of each of the springs and screws in the plunge base and place the spring under the wing screw to hold tension to prevent it from loosening when not in use. The plunge base actually does include one of these wing screws for setting the depth guide only. It does not come with the spring under it, but the plunge base depth adjust on the larger DW618 router does have the spring so I also added a spring to my DWP611 plunge depth set wing screw as well. This same screw as described above is what fits the base for the edge guides (for both the DWP611 plunge, and the DW618 fixed and plunge bases).You don't have permission to access "http://www.homedepot.ca/product/dewalt-1-1-4-hp-max-torque-variable-speed-compact-router/1001564628" on this server. Which one’s speedier? According to the data we’ve gathered, it’s the Makita RT0701C, with an RPM rating of up to 30,000 RPM. In comparison, the DeWalt has up to 27,000 RPM. Weight I've seen the teardrop shaped one, and i don't think it's quite wide enough. If the square one is at least 10" it'd likely work, but I'd much prefer a non square shape to allow for easier turning, or spinning, of the router when nearing clamps or other obstructions. The Dewalt DWP611 Compact Router makes niche wood cuts so much easier. The fixed base wiggles slightly inch Dust Collection Hose Adapter for DeWalt DW735 DW735X | Dewalt Planer with Stand | Dust Collection | Woodworking | DeWalt Tools