Seam Grip will flake away naturally off your hands in a few days. You can help this process somewhat by washing your hands with soap and water and using a disposable shop rag to remove as much of the adhesive as possible. We do not recommend using any type of solvent on your skin.

Use Aquasure® for repairing wader seams. Turn waders inside out and examine seams and fabric for gaps.Apply Aquasure® directly to the seam, extending over seam and on to fabric by 5 mm. Use brush to work Aquasure® under fabric folds and into stitching. Allow Aquasure® to cure for 8 to 12 hours. Apply just enough Seam Grip to cover the hole and spread ca. 6 mm beyond. Allow to dry (cure) level overnight. For 2-4 hour cure time, mix Seam Grip with Cotol-240™plus before applying. (fig. 4) Durable: Tough urethane adhesive bonds permanently to surfaces and dries as a clear rubber that’s weather-resistant Seam Grip can be diluted with Cotol-240 plus or Xylene. Mixing with Xylene will only dilute the adhesive. Xylene will not provide a faster cure time. Aquasure SR is a patented, urethane-based adhesive designed for shoe repair and restoration. It rebuilds worn heel and toe areas, reattaches separated soles and creates durable toecaps. Aqua sure SR is safe for use on all types of footwear including boots, athletic shoes, climbing shoes, rollerblades and more. As an Aquasure adhesive it offers excellent adhesion, superior waterproofing and long lasting flexibility with minimal shrinkage. However, it is specifically formulated for footwear offering excellent abrasion resistance, protecting your shoe from scuffs and scratches.When applied, Seam Grip cures by reacting with the humidity in the air. It doesn’t ‚dry‘ the way other glues do. You can color Aquasure FD using ceramic pigment found at most craft stores. Just mix it directly into the Aquasure FD. Once cured Aquasure FD is inert.

unique formula is the industry standard for maximum bond strength, abrasion resistance, flexibility and waterproofing.

Sign Up To Our Newsletter To Receive A Discount Code For 10% Off Your First Order!

Offers excellent adhesion, superior waterproofing, and long-lasting flexibility with minimal shrinkage. With Aquasure® by McNett® you can easily repair tears and rips in your wet or dry suits and many other types of Watersports equipment. Aquasure is a clear, waterproof adhesive and sealant, specially formulated for the flexibility, adhesion and abrasion protection you need to keep you going. Product Code(s): Use Aquasure® to repair felt soles. To repair peeling felt soles, clean and dry peeling area. Apply Aquasure® in gap and close. Can also be used to attach new felt soles. Use tape to hold repaired area closed overnight. Remove tape when fully cured.

Flexible urethane formula waterproofs, seals and protects against abrasion. Hundreds of water sports and household uses. For fast cure, use with Cotol-240™plus Cure Accelerator. Useful for waterside repairs to tears in neoprene and for replacing gaskets on wet suits and dry suits that may need future removal or replacement. Use Aquasure® to repair felt soles. To repair peeling felt soles, clean and dry peeling area. Apply Aquasure® in gap and close. Can also be used to attach new felt soles. Use tape to hold repaired area closed overnight. Remove tape when fully cured. Bivvie and Umbrella Repair

Technical Product Details

If a small section has peeled use Seam Grip to re-attach it (fig. 5). If the tape seems to be failing everywhere, remove and discard it, then clean the seams with Cotol-240™plus or isopropyl alcohol and re-seal with Seam Grip. For instant in field wader repairs, use the Aquasure® Instant Repair Kit. Apply a patch over tear on outside of wader. Apply Aqusure® to tear on inside of wader and 5 mm beyond the tear. Cover with another patch. Waders can be used immediately. Patches can be removed after 2-3 days. McNett Aquasure+FD adhesive provides a clear, strong and flexible finish for permanent waterproof repairs for use on most materials, including: neoprene, rubber, textiles, hypalon, PVC, polyester, nylon, polyurethane etc - does not bond to silicone coated surfaces. Urethane adhesive is the best for achieving maximum strength and durability. Full instructions provide helpful advice and how best to prepare surfaces prior to use. With Aquasure® by McNett® you can easily repair tears and rips in your favorite waders, bivvie and outdoor equipment. Aquasure is a clear, waterproof adhesive and sealant, specially formulated for the flexibility, adhesion and abrasion protection you need to keep you going.