The Digistat is universal because it can be used as a fully-programmable thermostat or as a simple manual thermostat. In fact it contains 4 types of functionality: 7-day programming These settings appear in the installer menu and it is important to select the setting for your heat source: gas boiler (default), oil boiler, heat pump, or electric heating The Digistat remembers the last BOOST so if you always use the same parameters just press the O button once. Simple!

Green Premium is the Schneider Electric eco-mark that brings more value to our customers and more growth to our company. When used with electric heating the Digistat cycles the heater at 12 cycles per hour to maintain room temperature and save money. This groups weekdays and the weekend separately, so you can set a schedule for your weekdays and a separate schedule for the weekend. The Digistat+3 features a simple and intuitive interface, allowing users to easily adjust the temperature according to their preference. It has a digital display that clearly shows the current temperature, as well as the set temperature.When used with an oil boiler the Digistat will allow the boiler to run without cycling for improved efficiency. Reset the Digistat thermostat by going into the setting menu, selecting the Inst03 menu (installer settings) and then rSEt20 to reset to factory settings. Then remove the batteries. When used with a Heat Pump the Digistat will protect the compressor by reducing cycling to 3 cycles per hour, to improve the life of the compressor. To swap between Heating and Hot Water on the thermostat press the setting button (cog symbol) to open this open.

There are known issues using Bluetooth with some later Apple devices. However the RETRY button should allow you to pair your Digistat within a few attempts. When a boost is selected, a timer symbol appears in the bottom right of the display and remains until the next event.When used with a gas boiler the Digistat will automatically cycle the boiler to help your boiler to run more efficiently and save you 10% on your heating bill (compared to a simple ON/OFF thermostat). The Digistat qualifies as one of the additional measures required when replacing a boiler. In fact it qualifies both as a Smart Control and as Load Compensation. Which Digistats are being replaced? 2290B However this auto-pairing process only lasts 2 minutes (to avoid issues of pairing with the wrong Digistat). If you find that the 2-minute auto-pairing period has expired, please follow the following process:

The Drayton Digistat+3 is a thermostat designed for controlling heating systems in residential and commercial buildings. It is manufactured by Drayton, a well-known company in the field of heating controls. There may be other Digistats powered up and within range and this will slow down the pairing process. If it is possible to depower the other Digistat please do this while you are pairing, or if not then press “I have done these steps” and wait for the RETRY button to appear. On the second attempt the pop-up should appear instantly. With its advanced programming capabilities, the Digistat+3 allows users to set different heating schedules for each day of the week. This can help to optimize energy consumption and reduce heating costs.In either mode the radiator or tap icon will be displayed. How do I change from Automatic to Manual mode? Depending on the fuel type you select during installation will affect how Digistat works with your boiler/heat source - so ensure to select the correct type during installation. Does Digistat work with combi-boilers and conventional boilers? Yes, there is a Digistat to suit both types of boiler – try our product selector to find the right one for you. Do I need an OpenTherm boiler to use Digistat?