If a condition of rising damp exists, the best form of treatment is the insertion of a damp proof course. Where dampness is due to penetration of the wall, proceed as follows: Preparing the surface is of vital importance to enhance the adhesion and life of the coating. All surfaces must be thoroughly dry and clean as well as sound and stable. Metal surfaces should be wire brushed to remove rust and for long-term protection, a rust-inhibitive product such as zinc phosphate or red lead should be used. Blistered or loose paint as well as tar-based paint systems should be eliminated. New galvanised surfaces should be treated with a proprietary etch primer or roughened with a wire brush. Autumn Statement: State pension confirmed to rise by 8.5% from April 2024 – while some benefits will go up by 6.7%

NatWest, RBS and Ulster Bank to close at least 172 branches in 2023/24 – here's the full list, plus alternatives Metal protection - corrugated iron sheets, fire escapes, stairways, ladders, storage tanks, gutters, down pipes, fences, railings, gates etc.Protecting coating on concrete etc: Due to the porous nature of concrete and some stone surfaces, an initial primer coat of Everbuild primer should be applied.

Where under floor heating is incorporated into the sub floor the heating must be turned off for at least 48 hours before, and until after, tiling.The Chancellor Jeremy Hunt has today (Wednesday 22 November) announced a range of tax, benefits and savings measures. We round up the key announcements and what they mean for you. Martin Lewis: What the Autumn Statement means for you – including wages, benefits, pensions, ISAs, housing, national insurance and more Wherever possible, very damp walls should receive an external treatment such as waterproof render/masonry paint etc. If this is not possible, the following procedure may benefit - although it must be emphasised that only adequate external treatment will cure the most severe conditions. Ready to use, this Everbuild paint should not be thinned and can be applied by spray or brush. A minimum of two layers should be added to the surface. The first coating should be left to dry before applying the second which typically takes two to four hours depending on weather conditions. create a level floating floor with hardboard if you have limited ceiling height or green chipboard glued if you can afford the headroom

Both employees and self-employed workers will pay less in National Insurance from next year, Chancellor Jeremy Hunt has announced in today's Autumn Statement.Autumn Statement: Workers to pay less in national insurance – but rate cuts don't offset the freezing of personal tax thresholds

Martin Lewis: What the Autumn Statement means for you – including wages, benefits, pensions, ISAs, national insurance and more NatWest, Royal Bank of Scotland (RBS) and Ulster Bank, which are all part of the NatWest Group, will now shut at least 172 of their bank branches in 2023 and 2024. Bitumen paint, adhesives, and primers are ideal for areas that need to be made waterproof and robust enough to face the elements. While bituminous coatings are most commonly used for outdoor surfaces, such as roofs, metal guttering, railings and fences, some items in our range can also be used indoors for certain applications.