You don't have permission to access "http://www.homedepot.com/p/Fireplace-Plug-16-in-x-38-in-Rectangular-Fireplace-Plug-Rectangular-Fireplace-Plug-BRK-FP-05-01/100662572" on this server. If there’s heavy wind blowing into your gas fireplace through the chimney, a chimney balloon can come in handy. The fireplace plug creates an air seal by filling the space within your chimney. That keeps the wind from getting into the chimney while reducing the noise. Installing glass doors to the front of an open-hearth fireplace can nearly double the fireplace’s heat efficiency. Not only does the glass stop cold air from entering the room, but it also provides a safety barrier for children and pets. Many styles of tempered-glass, hinged doors come with magnetic latches to keep them tightly closed. You can inflate the chimney balloon after inserting it into your chimney instead of the other way around. However, it’s better to inflate it halfway, place it inside the chimney, and fully inflate it from there.

CHIMELLA STANDARD– flue size between 150mm x 150mm up to 430mm x 430mm at a height of between 600mm and 700mm above the fireplace opening. Our gardening products can help your garden survive (and even thrive!) during the winter months. Read our advice on how to utilise our gardening products to best suit your gardens' needs. The added benefit of doing all this will be that if you ever decided to use that fireplace for a wood burner, providing you choose a stove fit for the purpose of your fireplace and room, the chimney is set up ready for a flexible flue liner installation, which should inevitably save you some costs toward the installation. 2019-05-06T20:30:02+01:00

Fireplace Blankets

The Chimney Umbrella fits all round, square and rectangular flue sizes. Please see below for the range of Chimella sizes to match your flue. Are you finding it hard to light your gas fireplaces due to wind gusts? If your vent is uncovered, this means that a lot of air is entering your gas fireplace and blowing out the flames. In that case, installing a wind guard is the best option. With it being Peat Free April, we thought it was probably a good time to update you on our latest Buy Land Plant Trees project. We’ve been starting the process of restoring a peat bog! This will help you calculate where to hold the CHIMELLA before releasing the canopy to the desired height in your chimney.

The environmental price tag of laundry is rather hefty. Washing machines, driers and heated towel rails guzzle electricity, while chemical laden detergents wreak havoc on aquatic environments. Our comprehensive guide to swaps and changes you can make to ensure your laundry routine is as environmentally friendly as possible! CHIMELLA EXTRA LARGE– flue size between 225mm x 700mm up to 550mm x 1250mm at a height of between 600mm and 700mm above the fireplace opening.hi get it cleaned and cap it off at the top cheapest way would be with slate drill some holes in the slate to let it breath or box it in so you can not see it 2015-07-01T09:15:04+01:00 If the wind or cold air isn’t blowing from your chimney, it could be getting through gaps on the vent pipe. Vent pipes are essential components in vented gas fireplaces since they facilitate combustion and ventilation. However, when leaking, these pipes can cause draft problems. Although the energy cap issued by Ofgem is lower than last winter, we are in a “new norm” of higher energy bills. Read our latest advice to ensure you keep your energy bills as low as possible. A wind guard usually has a mesh around it and an aluminum cap on top. Aside from vents, chimneys are also a good place to install a wind guard. However, do this only if you have a gas fireplace. 2. Install a Chimney Cowl