Push the blade through the material piece until it has completely cut through it. Keep the material still as you cut.

The disadvantage of this machine lies in the tilt adjustment. Unlike other products, the tilt of the VonHaus 1500W can be adjusted in one direction only.Additionally, you can go for accurate and persistent mitre angle settings up to 60 degrees on the right, and up to 50 degrees on the left. Thus, performing bevel cuts, mitres, and crosscuts is not a challenge to this model. A beginner miter saw can cut at a variety of angles. While it utilizes the same downward cutting motion, the angle of cut can be adjusted. VonHaus utilizes a 1500W 240V motor to generate power for this model. With this powerful motor, almost no types of DIY jobs in your house can challenge this mitre saw. Also, the 1500W VonHaus includes a (210 mm) 8.2-inch blade that contributes to the fast and precise cutting capability of this model. Moreover, you can utilize this Silverline 262705 to deliver 120 x 50 mm cross cuts, which is such an impressive cross cut capacity. By that we mean, this product can provide you with an exceptionally long cut.

Large Diameter Pieces:A chop saw is not a good saw for cutting large diameter wood pieces such as plywood. This is far too large for a chop saw, and it will never balance properly with the fences. You’d prefer a suitable band sawor even a​basic table sawfor this type of cut. This is a fine saw for someone who isn’t demanding too much. If you’re doing rough work and accuracy isn’t a priority, it’ll serve you fine. It’s just not up to trade-level standards.

Common Wood Chop Saws

Apart from the 1600W, there is another factor that contributes to the power and efficiency of this model. It is a high-quality HW/TCT saw blade with 48 tooth-saws. Besides, the blade of this UK TC-MS 2112 is designed with the carbide-tipped shape so that the mitre saw of Einhell is capable of delivering more than 200 m of cutting capacity in particle board. A mitre saw can be referred under three different names. Firstly, in the USA, a mitre saw is called a miter saw. Besides, many people refer to this type of saw as power mitre boxes or chop saws. Yet, no matter what people call it, the primary aim of a mitre saw is to manufacture woody workpieces with highly precise mitres and crosscuts. This is also the aspect that makes mitre saws stand out from other types of saw. The reason is that mitres and crosscuts in woodwork are tough to complete. Like the compound-mitre saw, the dual compound-mitre saw is widely used due to the flexibility of its head. Yet, this version is more advanced because it allows users to rotate the head without moving the woodwork Einhell have managed to sidestep the problem that the Evolution and Metabo saws had with their wobbly two-part fences. They’ve simply made the fence much lower where the blade could meet it. That means you can’t chop into the fence accidentally, and it’s a really solid and straight surface to work with.