Un-mount Eve Thermo and make sure that you can move the valve on heater side (if not use grease and eventually hit the valve's body with a hammer to solve the problem) File "/usr/src/homeassistant/homeassistant/helpers/entity_component.py", line 166, in async_setup_entry I had an Eve door & window sensor that behaved erratically: It should pause heating as long as the window is open, but I often found the heating turned on while the window was open. At other times heating suddenly stopped despite the window was closed, etc. I have 4 sensors in other rooms with the same automation which work just fine.

File "/usr/src/homeassistant/homeassistant/components/matter/__init__.py", line 109, in async_setup_entry File "/usr/src/homeassistant/homeassistant/components/matter/__init__.py", line 131, in _client_listen The power source 2. The sensor; 3. The connection between the sensor and the door or window. We’ll go over how to troubleshoot each of these components below. Simply completing these three steps will make this problem go away. After turning off the Bluetooth on your phone, restarting your device, and then opening the home app again,Once you have the two Eve Door & Window pieces installed, you can add the accessory to HomeKit by scanning the QR code on the sensor module with your iPhone’s camera; doing so will jump you directly to the Apple Home app, where you can group the sensor with other HomeKit devices in a given room. In my case, I added the sensor to the kitchen. If you have updated your firmware on your sensor, it may take a few hours before it syncs with its hub again and becomes responsive.

You should be able to correctly monitor if someone has been tampering with your property after resolving these seven frequent issues with the Eve Door & Window Sensor. While Eve Door & Window are compatible with HomeKit and Thread, it doesn’t work with Alexa or Google Assistant. That means the sensor is pretty much only for Apple users. The ismartgate Wireless Magnetic Sensor is an outdoor solution meant to work with gates that guard your home or driveway. This sensor reports directly to the ismartgate Gateway which is mandatory for use, but the convenience of knowing the status of your gate may be worth the investment.

First Eve devices available

You can always keep an eye on your home with the best HomeKit door and window sensors, regardless of the one you choose. Be sure that there is nothing, such as dirt or debris on the doorframe, that is preventing the sensors from detecting motion. If you find that the door sensor on your door is not detecting any movement, this may be a sign that the batteries in the sensor need to be replaced.

You can also try resetting your sensor by removing the batteries and holding down the button for 10 seconds until you see all three LED lights turn on. Then replace them and wait for the sensor to sync up with its hub again. Please make sure you are using the correct adapter and make sure the valve pin can be pushed in freely. Re-mount Eve Thermo firmly. After using up all of the power in the battery, you should connect the device to a power source and let it charge for a full day. Matter, the new smart home protocol developed by leading smart home platform providers and device manufacturers to enhance interoperability in the smart home, was officially launched now by the Connectivity Standards Alliance. A first-mover on Thread and an early member of the Matter program, Eve participated in the testing and validation of the Matter specification that was released in October. The entire lineup of now 14 Thread-enabled Eve devices will receive free Matter firmware updates over time. Availability of Matter-certified Eve products in retail will start in first quarter of 2023. The Eve app, which has been available exclusively for iOS, will be complemented by a sister version for Android in the same period.Each sensor can be named after a corresponding door or window so you will know immediately where to look for threats. Please unmount Eve Thermo, make sure the valve pin can be pushed in freely, and re-mount Eve Thermo firmly. If it is gooey, you should clean it with baking soda; and if it is dry, you should clean it with rubbing alcohol. The most typical issue that arises with this piece of hardware is that it does not function appropriately with Apple Home.

With the Abode Mini Door/Window Sensor, you can get immediate alerts, trigger your alarm, and get notified when a door or window is opened.you can’t reset the device without the battery inserted. If you do that without the battery inserted nothing will happen. In this article, we will discuss seven issues that are often experienced with the Eve Door & Window Sensor, as well as solutions to these issues. Common Eve Door & Window Sensor Problems Troubleshooting HomeKit door and window sensors are an easy to install way to report on the status of your home. These sensors provide instant notifications when their status changes, and even work with other HomeKit accessories, enabling powerful automations. We love the Eve Door & Window sensor for its fast response times, and modular design, allowing it to function even if your surfaces are not in the best shape.