The Frient collects readings from your existing electricity meter and, via a compatible hub, sends the data to a connected device. phase_id: phase_b input: "B " # Verify the CT going to this device input also matches the phase/leg power:

name: "Phase B Power Return " id: phase_b_power_return filters: [*throttle_avg, *invert] # This measures energy uploaded to grid on phase B The Vue also promises over time to deliver both demand- and supply-side data. This means that recommendations for energy savings will consider more than mere conservation. Rather, they will also give insight into real-time costs and fuel used for energy. No other system considers both sides of the energy equation – all in the interest of saving consumers money and reducing carbon.

Efergy

|D][esp-idf:000]: E (10373955) EmporiaVue: 0x3ffb92b4 00 00 00 01 00 00 03 e8 fb fb 00 00 00 00 01 5f |..............._ ENERGY MONITORING: Monitor your home's real power anywhere, anytime to prevent costly repairs, conserve energy, and save costs. Monitor solar / net metering. Supports light commercial 3 phase systems less than 600A with additional 200A clamp ( sold separately ). PROTECTED BY A 1-YEAR WARRANTY. |D][esp-idf:000]: E (1322651) EmporiaVue: 0x3ffb9210 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................ If you are a provider of home services, Emporia offers a powerful tool to help grow your business. Specifically, Emporia partners can develop stronger connections using the same IoT strategy of large technology companies.

As indicated above, the CT-based Vue is installed behind a home's main electrical panel. This installation can be achieved either by a homeowner or by a qualified electrician. If you allow it, Vue will send actionable notifications to your smartphone via the app. These give clear calculations showing your savings when you perform the recommended actions. Additional costs id: phase_b_power filters: [*pos] # Pay close attention to set the phase_id for each breaker by matching it to the phase/leg it connects to in the panelthe result of that is that my 200A CT measures “only” consumption and the solar generated is measures on a separate 50A CT I did this as most measuring systems are not bi-directional so this gave more accurate readings and I was under the impression that this would be the same with the Vue? Emporia has developed the next generation of the Vue Energy Monitor. Committed to bringing the best value at the lowest price possible, the Vue provides everything you need to monitor your entire home's energy usage in real time. See how much electricity your home is using anywhere, anytime.

platform: template name: "Total Power Return " lambda: return id(phase_a_power_return).state + id(phase_b_power_return).state; update_interval: 1s id: total_power_return device_class: power state_class: measurement unit_of_measurement: "W " |D][esp-idf:000]: E (10374023) EmporiaVue: 0x3ffb9304 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................ |D][esp-idf:000]: E (1322674) EmporiaVue: 0x3ffb9230 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................ Plug the USB adapter in. Connect RX to RX, TX to TX, and GND to GND. Do not connect 5V or 3.3V at this time. If the above command fails, try again using esptool.py -b 115200 read_flash 0 0x800000 flash_contents.bin. Flashing new software|It now internally derives kWh produced / consumed. There is a separate vue-utility-solar.yaml that outputs these individual sensor values. |D][esp-idf:000]: E (1322542) EmporiaVue: 0x3ffb9240 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................ |D][esp-idf:000]: E (1322516) EmporiaVue: 0x3ffb9220 00 00 00 01 00 00 03 e8 fb fb 00 00 00 ff fa 83 |................ People who want to see how much energy they're using and who want to make small, positive changes to their energy usage could benefit from an energy monitor. Combining them with a cheaper energy deal can help to save even more. |D][esp-idf:000]: E (1322711) EmporiaVue: 0x3ffb9260 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................