configuration: broadcast=yes driver=iwlwifi driverversion=5.15.0-33-generic firmware=66.f1c864e0.0 QuZ-a0-hr-b0-66.u latency=0 link=no multicast=yes wireless=IEEE 802.11

With the high demands of a fanless mini pc with PD, MeLE newly releases Quieter3C mini computer, which amazingly supports Power input PD3.0 , Data Transmit , Video Display Via one USB-C Port. Plus 1xMini DP, support 4K@60fps. This micro computer with excellent compatibility, which could improve efficiency for your personal computing, office work, business, industrial, education, home-learning, home office, home entertainment.”Additionally, there is a soldered-on WiFi 6 (or 802.11ax) Intel AX201 card as well as the ability to add an M.2 2280 NVMe SSD drive: When reviewing mini PCs I typically look at their performance under both Windows and Linux (Ubuntu) and compare them against some of the more recently released mini PCs. I now review using Windows 11 version 21H2 and Ubuntu 22.04.1 LTS. I test with a selection of commonly used Windows benchmarks and/or equivalents for Linux together with Thomas Kaiser’s ‘sbc-bench’ which is a small set of different CPU performance tests focusing on server performance when run on Ubuntu. On Ubuntu, I also compile the v5.15 Linux kernel using the default config as a test of performance using a real-world scenario. But I haven't needed the USB hub yet. With the previous mini PC, my mount would disconnect at times, and a powered hub was the solution. The only place where it may fall down is in the WiFi (mine came with WiFi 5) and its speed throttling even on one of the 6W Jasper Lake processors (the PN41 is fanless). However, you could upgrade to WiFi 6 with a fairly inexpensive M.2 card/replacement. Don't know about the speed throttling, I haven't found any way to disable that although for safety/reliability reasons it might be a good idea to just leave it as is (the performance for imaging and remote access seems okay).

Mobo: Fanless Mini PC model: Rev JSL1 1.10 serial: UEFI: American Megatrends LLC. v: ML_JPL1V4.2 date: 07/14/2022 em]If i have a separate astronomy power supply unit supplying 12 v at 2 a, can i power this quieter3q via a usb-c cable from this unit?.[/em] Mobo: Fanless Mini PC model: Rev JSL1 1.10 serial: UEFI: American Megatrends LLC. v: ML_JPL1V6.1 date: 07/11/2022

configuration: broadcast=yes driver=iwlwifi driverversion=5.15.0-47-generic firmware=66.f1c864e0.0 QuZ-a0-hr-b0-66.u latency=0 link=no multicast=yes wireless=IEEE 802.11 As I mentioned in the recent powerbank post, I run a Mele Quieter 3Q (the 3C was not available at the time) and it runs without any issue via a PPBA with my 12V LiFePO4 battery but I had to make/convert a USB-C cable such that one end is USB-C (for the Quieter) and the other end is 5.5-2.1mm round connector that connects to the PPBA. I don't have the specific Quieter3C, but I do have a HiGole Mini, which is another mini PC with 12V input power through a USB-C connector (must be a fetish), but with a tiny screen. I power my mini PC with one of these: and lists the USB ports as either 3.0 or 2.0 so I tested them together with the Type-C USB port using a Samsung 980 PRO PCle 4.0 NVMe M.2 SSD housed in a ‘USB to M.2 NVMe adapter’ (ORICO M2PAC3-G20 M.2 NVMe SSD Enclosure) which showed that the ‘blue’ USB ports were ‘USB 3.1’ (USB 3.2 Gen 2×1 i.e. 10 Gbit/s):