A. Yes. Our Ultra Clean does not contain any solvents or abrasives and has been specially made for use on all leathers, therefore it will not cause any damage. It can also be used on natural and delicate leathers such as aniline, semi-aniline and oil/ wax pull-up.

The Leather Re-Colouring Balm has been designed to restore the colour and natural features of all absorbent leather items. We have a range of 16 colours formulated for use on leather from a dark to light shade. If you don’t have a commercial cleaner, mix together 1 part mild soap with 8 parts distilled water. Use baby soap or a liquid dish or hand soap. Proceed by cleaning the area with strong leather cleaner. Make sure you remove all dirt, grime, and other residues before using a leather preparation product. Apply the prep with an abrasive pad or a cloth to gently remove the finish. The colour of the leather will change on the treated spot. Each kit comes with the right tints to match a huge spectrum of similar colours! Detailed (Step by Step) Leather Repair InstructionsAlways test any products first on a hidden area to test for colour match!Firstly, clean the leather thoroughly and prepare the surface. Use Mild Leather Cleaner for normal degrees of soiling or Strong Leather Cleaner to remove heavier dirt (where the leather has been neglected for many years). Cleaning prior to treatment ensures the paint bonds to the surface well and ensures durability. Use Leather Cleaning Brush to effectively remove all ingrained dirt. Cleaning removes dirt but for long lasting results you should also de-grease usingDegreaser.Use a sponge to apply the colour evenly, working from seam to seam. Dry afterwards with a hair dryer. On small spots, a one application is sufficient. Apply multiple thin layers and dry each layer using a hair dryer.A day later, after it dries, apply Leather Protector. It gives the leather a good sheen and helps blend the repair. It contains antioxidants, which stops the leather's decay, and its UV filters protect the surfaces of old and valuable leathers from bleaching and fading. Also keeps the leather supple.

A. No, once the Balm has soaked in and been buffed off it is completely colourfast. You should buff the leather with a clean, dry cloth until there is no colour transfer showing on the cloth. Well, the leather guy didn't return my calls and texts for days. He finally got around to finish up the job a couple days ago. The Leather Colourant Kit is designed to restore or change the colour of large areas, such as a full sofa or car interior.

After the gap is filled, and the compound is dry, proceed to sand off and smoothen the area with fine sandpaper. Remove all of the residues from the sanding with the help of some alcohol and a cotton pad. Let the alcohol evaporate completely for about half an hour. Apply the leather sealer on top and leave it to dry once again.

Leather dye is available online or at some craft and general stores. They are sometimes sold in kits that include sandpaper and applicator pads. A. Yes, however, for the Balm to work the leather must be absorbent or scratched to a lighter colour. You can test if your leather is absorbent by dropping a small drip of water onto the leather’s surface. If it soaks in, then this is the ideal product for you. If the water does not absorb, we recommend using either our Complete Leather Repair Kit for small areas or our Leather Colourant Kit for larger areas. The ideal kit; perfectly designed for restoring or repairing any old, worn or faded leather steering wheel. To repair rips and holes we suggest initially purchasing our Pro Leather Repair Kit which includes all the additional products required for carrying out repairs on holes or rips which have penetrated right through the leather to the inner padding.Get 500ml Leather Protection Cream in addition to the contents of the Easy Restoration Kit by upgrading to our Complete Leather Restoration Kit. Leather Fresh is a colour refresher (dye) for scratches, worn, or faded leather. Leather Fresh is ideal to refresh colour damages on car leather, furniture leather, leather garments and handbags. Do not use on porous leathers unless colouring the entire surface - it can make the surface appear patchy. It can be sponged on or sprayed using an airbrush.