Standard available to all VESA members [ dubious – discuss] with an extensible standard to help broad adoption [67] HBR3 mode with 25.92 Gbit/s of effective video bandwidth, using CVT-R2 timings, allows eight simultaneous 1080p displays (1920 × 1080) @ 60 Hz, stereoscopic 4K UHD (3840 × 2160) @ 120 Hz, or 5120 × 2880 @ 60 Hz each using 24 bit RGB, and up to 8K UHD (7680 × 4320) @ 60 Hz using 4:2:0 subsampling [69] Wireless DisplayPort ( wDP) enables the bandwidth and feature set of DisplayPort 1.2 for cable-free applications operating in the 60 GHz radio band. It was announced in November 2010 by WiGig Alliance and VESA as a cooperative effort. [92] SlimPort [ edit ] A SlimPort-to-HDMI adapter, made by Analogix Multi-Stream Transport is a feature first introduced in the DisplayPort 1.2 standard. It allows multiple independent displays to be driven from a single DP port on the source devices by multiplexing several video streams into a single stream and sending it to a branch device, which demultiplexes the signal into the original streams. Branch devices are commonly found in the form of an MST hub, which plugs into a single DP input port and provides multiple outputs, but it can also be implemented on a display internally to provide a DP output port for daisy-chaining, effectively embedding a 2-port MST hub inside the display. [37] :Fig. 2-59 [54] Theoretically, up to 63 displays can be supported, [37] :20 but the combined data rate requirements of all the displays cannot exceed the limits of a single DP port (17.28 Gbit/s for a DP 1.2 port, or 25.92 Gbit/s for a DP 1.3/1.4 port). In addition, the maximum number of links between the source and any device (i.e. the maximum length of a daisy-chain) is 7, [37] :§2.5.2 and the maximum number of physical output ports on each branch device (such as a hub) is 7. [37] :§2.5.1 With the release of MST, standard single-display operation has been retroactively named "SST" mode (Single-Stream Transport). HBR3 (High Bit Rate 3): 8.10 Gbit/s bandwidth per lane (810 MHz link symbol rate), introduced in DP 1.3

VESA Highlights Growing DisplayPort Alt Mode Adoption and Latest DisplayPort Developments at Mobile World Congress". VESA - Interface Standards for The Display Industry. 15 February 2017. Standards". Vesa . Retrieved 27 January 2016. {{ cite journal}}: Cite journal requires |journal= ( help)pins for the main link – the main link consists of four shielded twisted pairs. Each pair requires 3 pins; one for each of the two wires, and a third for the shield. [8] :§4.1.2, p183 (pins 1–12) VESA Publishes Embedded DisplayPort Standard Version 1.5". 27 October 2021 . Retrieved 28 October 2021. VESA Refreshes DisplayID Standard to Support Higher Resolutions and Tiled Displays". vesa.org. 23 September 2013. Archived from the original on 8 February 2015 . Retrieved 24 December 2013.

Color depth of 10 bpc (30 bit/px or 1.07 billion colors) is assumed for all formats in these tables. This color depth is a requirement for various common HDR standards, such as HDR10. It requires 25% more bandwidth than standard 8 bpc video. Your monitor likely has a few different DVI configurations that you will need to adjust, including the DVI-I and the DVI-D, the color depth, refresh rate, and resolution.As competing standards, they share a lot of features in their various incarnations. DisplayPort can also carry audio signals on a single cable, and the latest release supports up to 8K resolution at 60 hertz with high dynamic range. The next version is expected later this year. DisplayPort 2.1 has tightened its alignment with the USB Type-C specification as well as the USB4 PHY specification to facilitate a common PHY servicing both DisplayPort and USB4. In addition, DisplayPort 2.1 has added a new DisplayPort bandwidth management feature to enable DisplayPort tunneling to coexist with other I/O data traffic more efficiently over the USB4 link. Video Electronics Standards Association (VESA) Endorses Alternative to Copper Cables". Luxtera Inc. 17 April 2007. Archived from the original on 18 February 2010 . Retrieved 19 January 2010.

All DisplayPort cables are compatible with all DisplayPort devices, regardless of the version of each device or the cable certification level. [42] VESA Adds 'Adaptive-Sync' to Popular DisplayPort Video Standard". vesa.org. 12 May 2014 . Retrieved 27 January 2016.IDC Whitepaper: “Optimizing Performance with Frequent Server Replacements for Enterprises” commissioned by Dell Technologies and Intel, March 2021. Results are based on interviews with 18 IT practitioners and decision makers at midsize and large enterprises and a web survey of 707 IT practitioners and decision makers at midsize and larger enterprises using Dell Technologies server solutions across 7 industries. See full whitepaper: https://www.delltechnologies.com/resources/en-us/asset/white-papers/products/servers/server-infrastructure-resiliency-enterprise-whitepaper.pdf DisplayPort has historically had higher bandwidth than the HDMI standard available at the same time. The only exception is from HDMI 2.1 (2017) having higher transmission bandwidth @48 Gbit/s than DisplayPort 1.3 (2014) @32.4 Gbit/s. DisplayPort 2.0 (2019) retook transmission bandwidth superiority @80.0 Gbit/s. VESA Strengthens 8K Video Resolution Ecosystem with Market-ready DP8K Certified DisplayPort Cables". VESA– Interface Standards for The Display Industry. 3 January 2018. a b c d e f g Although this format slightly exceeds the maximum data rate of this transmission mode with CVT-R2 timing, it is close enough to be achieved with non-standard timings pins for the auxiliary channel – the auxiliary channel uses another 3-pin shielded twisted pair (pins 15–17)

In hindsight, I would have bought a Display Port Monitor or a second card, both options would have been cheaper and less problematic than the Adapter, but I already had 3 screens. Signs of the Times: Massive Digital Signage Displays Powered by Diminutive Graphics Card". The Official NVIDIA Blog . Retrieved 27 January 2016. In DisplayPort versions 1.0–1.4a, the data is encoded using ANSI 8b/10b encoding prior to transmission. With this scheme, only 8 out of every 10 transmitted bits represent data; the extra bits are used for DC balancing (ensuring a roughly equal number of 1s and 0s). As a result, the rate at which data can be transmitted is only 80% of the physical bitrate. The transmission speeds are also sometimes expressed in terms of the "Link Symbol Rate", which is the rate at which these 8b/10b-encoded symbols are transmitted (i.e. the rate at which groups of 10 bits are transmitted, 8 of which represent data). The following transmission modes are defined in version 1.0–1.4a: In June 2019, with the release of version 2.0 of the DisplayPort Standard, VESA announced that the DP8K certification was also sufficient for the new UHBR10 transmission mode. No new certifications were announced for the UHBR13.5 and UHBR20 modes. VESA is encouraging displays to use tethered cables for these speeds, rather than releasing standalone cables onto the market. [40] WiGig Alliance and VESA to Collaborate on Next Generation Wireless DisplayPort". Wireless Gigabit Alliance. {{ cite journal}}: Cite journal requires |journal= ( help)Later the same year, Apple introduced several products featuring a Mini DisplayPort. [106] The new connector– proprietary at the time– eventually became part of the DisplayPort standard, however Apple reserves the right to void the license should the licensee "commence an action for patent infringement against Apple". [107] In 2009, AMD followed suit with their Radeon HD 5000 Series of graphics cards, which featured the Mini DisplayPort on the Eyefinity versions in the series. [108] Zotac releases DisplayPort to dual HDMI adapter". Anandtech. 2 August 2011 . Retrieved 23 January 2012. Hands on with the Analogix SlimPort microUSB to HDMI and VGA adapters". AnandTech . Retrieved 31 December 2013. Syed Athar Hussain (June 2016). "DisplayPort – Future Proofing Display Connectivity for VR and 8K HDR" (PDF) . Retrieved 11 May 2018. The DisplayPort AUX channel is a half-duplex (bidirectional) data channel used for miscellaneous additional data beyond video and audio, such as EDID ( I 2C) or CEC commands. [8] :§2.4 This bidirectional data channel is required, since the video lane signals are unidirectional from source to display. AUX signals are transmitted across a dedicated set of twisted-pair wires. DisplayPort 1.0 specified Manchester encoding with a 2 MBd signal rate (1 Mbit/s data rate). [8] :§3.4 Version 1.2 of the DisplayPort standard introduced a second transmission mode called FAUX (Fast AUX), which operated at 720 MBd with 8b/10b encoding (576 Mbit/s data rate), [37] :§3.4 but it was deprecated in version 1.3.