Hulin, A., Souchet, S., Fromont, C.: Usage and benefits of robotics in logistics and warehousing activities. Int. J. Prod. Res. 56(10), 3648–3668 (2018) On both laptops, it was simple to line up the camera lens with the centre of the screen, a big advantage over the side-mounting solutions for maintaining a good eyeline. Still, since it works only on MacBooks, it would be impossible for all but the shortest users to avoid capturing video from an unattractive low angle (this was slightly better when the phone is mounted in portrait, since the camera lens was higher). Zhong, Y., Du, R., Guo, P., Yu, H.: Investigation on a new approach for designing articulated soft robots with discrete variable stiffness. IEEE/ASME Trans. Mechatron. 26(6), 2998–3009 (2021)

Our local exhaust ventilation arms can accommodate a wide range of different hoods, including flared, curved fish tail, spun bell mouth and ringed. The Pixapro Heavy Duty Flexi-Arm features a male 5/8inch stud with a standard 1/4inch thread at one end, and a Female 5/8inch stud receiver at the other end. This configuration enables you to mount a small light or accessory on one end, and the other end can be mounted to a light stand or clamps such as a combi-clamp or a male C-Clamp etc. An increased surface area of all joints gives a much lighter feel to the extraction arm, allowing for easier positioning and support in any required position.Ata, A.A., Haraz, E.H., Rizk, A.E.A., Hanna, S.N.: Kinematic analysis of a single link flexible manipulator. In: 2012 IEEE International Conference on Industrial Technology, pp. 852–857. Athens, Greece (2012) Local Exhaust Ventilation For Dust & Fumes Is there a difference between a fume extraction arm and a dust extraction arm?

Kato, T., Okumura, I., Song, S.-E., Golby, A.J., Hata, N.: Tendon-Driven continuum robot for endoscopic surgery: preclinical development and validation of a tension propagation model. IEEE/ASME Trans. Mechatron. 20(5), 2252–2263 (2015)Here’s this flexible arm being used with a 16-inch Macbook Pro and an iMac. When used with a laptop, you can get a better angle than the built-in webcam, which is always going to be under your face, rather than parallel to it. Knight, G., Piotrowski, T., Shuford, J.: The role of robotics in manufacturing. Indust. Robot Int. J. 44(2), 155–163 (2017)

These let you rest your phone in place, rather than holding it securely. As such, they’re easy to get your phone in and out of, but they will wobble when you type. I found it was more difficult to get a good angle when using this slotted holder than with any other mount, as the phone couldn’t be adjusted as easily with these mounts, and would often fall into a different position, anyway. Make you look good. Step one here is to use Camo, which lets you use the incredible camera built into the phone as your webcam. In terms of your mount, you want it to be positioned near your computer screen. It’s disconcerting to talk to someone who doesn’t seem to be looking at you. You also want to be able to get your mount so that it’s roughly parallel to your face; too low and everyone else on the call will be gazing up your nostrils; too high and it will be pointed at your body. Just as this article does, I was also looking to find the "best" way to mount a phone on a laptop or monitor. I guess the difference is that I was not willing to buy and try all the mounts available out there :). Nonetheless, thanks for the great, in-depth review. What Industries Could Benefit From Using An LEV Extraction Arm? Safely remove dust & fume contaminates

Hoods, Hoses and Brackets For Your Extraction Arm

Be compact. When you’re not using your phone as a webcam, you probably don’t want a hulking great piece of plastic cluttering up your desktop. The choice of the correct hood, in conjunction with the correct operational use of your extraction arm, is fundamental to its success as a dust and fume extractor Factors that must be considered are the product and process being extracted and the distance from the hood to the process. Get that right and you will vastly increase the effectiveness of the extraction arm. Our LEV arms are fitted with a single or twin spring supporting mechanism to accommodate greater lengths and larger weights. Both of these options might work a little better on a laptop, but there’s no getting around the unflattering angle. With this criteria in mind, let's take a look at the various types of mounts you can use to turn an iPhone into a webcam. Tripods