On the topic of supporting lots of clients, we didn’t have 50-100 Wi-Fi client devices readily available for testing, but in a non-controlled, non-scientific testing of the Ubiquiti UniFi AP AC HD, we were able to get two 1080p streams from IP cameras, and eight 1080p YouTube streams from six smartphones and two laptops running simultaneously without issue. To specify which AP and which band was being used, I used the settings offered in the UniFi network controller or Instant On portal, and swapped them in and out as needed. I then stepped through the different channel widths and bands, letting the connection stabilize before beginning my tests. Next, I switched over to my MacBook Pro and it’s 3 spatial stream Wi-Fi 5 radio. This is an interesting test because it shows the impact of an additional spatial stream, and removes the highest-end modulation (1024-QAM) and longer symbol duration of Wi-Fi 6. This is a more even playing field, and a chance for the 3x3 and 4x4 APs to show their strength. Linux version 4.4.153 (builder@link-owrt1505-builder) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3979-2252731af4) ) #0 SMP Thu Aug 30 12:10:54 2018

Starting March 2017, we’ve upgraded our wireless client to an Apple MacBook Pro (Touchbar, Late 2016) as it’s one of the few notebooks on the market which features a 3×3 MIMO capable Wi-Fi controller/antenna array. We observed relatively large differences in the signal between 2.4GHz and 5GHz transmitters working in Mesh topology. At 2.4GHz the reported signal is 68dBm when the transmitter parameters are set in "auto" mode. At 5GHz the reported signal was only 86 dBm with "auto" mode settings. The UAP-AC-HD features auto-sensing 802.3at PoE+ support and can be powered by any of the following: Use the legend printed on the Mounting Plate to select the appropriate mounting holes for your installation. bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.Given that nothing is more thrilling to us than the prospect of faster Wi-Fi, today we’ll be reviewing the Ubiquiti UniFi AP AC HD (UAP-AC-HD) to see if it’s worth the upgrade from the UniFi AP AC PRO. Specifications Manufacturer IMPORTANT: The UAP-AC-HD cannot be powered by the US-8 or US-8-60W; however, it can be powered by other UniFi PoE Switches that provide 802.3at PoE+ power.

This model also requires 802.3at PoE+, so make sure you have a POE switch or power injector that is capable of that.Another benefit of Wave 2 is that up to four spatial streams are available, and more channels can be bonded together. Both of those features help achieve higher speeds. Deciding if the added costs and abilities are worth it is up to you. Antenna Differences You can also place the U6-LR in a semi-outdoor environment because it’s IP54 rated. If your house has multiple floors, or when you can only place one access point, then the U6-LR is a really good choice to mount on the ground floor (and use the lite models for the other levels).

For resetting the AP, there’s also a reset button and there’s also a micro-USB port for connecting an optional PA system. There’s also a cutout for routing cables and a soft cable organizer insert is also included for those who need it.

Wall Mount

Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500) Linux version 5.4.87 (builder@buildhost) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r15487-af49ae7d23)) #0 SMP Thu Jan 14 00:05:48 2021 Best is to place your access points on the ceiling or high on a wall if the ceiling isn’t possible. If both really are not an option for you, then the FlexHD might be a good solution. Keep in mind that furniture between the user and access point also limits the signal strength. Ubiquiti Networks ท่านสามารถติดต่อเราได้ที่ Line Official ของเรา ที่พร้อมจะให้บริการและช่วยเหลือในทุกคำถาม Dual-band, 802.11ac Wave 2 access point designed to support high-density networks and critical system applications.