I’ve currently got a Linksys EA9500 that covers the majority of my 5k SqFt home due to the central location that the router is located (there are a few dead spots, but I can mostly live with these). The idea of this mesh network is to keep all the Wifi5 devices separate. If you have a specific need for wifi 6 allow those devices to connect to the wifi6 channel (set it to AX only). I’m thinking about using my current single RT-AX92u wirelessly meshed with a tri-band RT-AC5300. Any comments or concerns regarding this setup? Again, the RT-AX92U is one of the tri-band routers that use different Wi-Fi standards for its three bands. If you have used just one unit as a single router and now want to expand the coverage, here’s the best way to go about that:

Support IPSec IKE v1 and IKE v2, and you can use the Windows 10 native VPN client program to connect to the router's IPSec VPN server. The Windows 10 new FAQ is in https://www.asus.com/support/FAQ/1033576 Both of these seem like overkill, but I want to have it set up correctly NOW to accommodate the event that we increase our bandwidth speeds in the future.PS all the time the router was connected to working ISP 300Mbit stable Cable connection. NTP working fine. I want wifi 6 for my NAS with ZFS/BTRFS/TimeMachine storage and less cables around the house. Coppercable dependency is a flaw to humankind in my opinion which we need to sort out of the system ASAP.

The Asus RT AX92U shares the same gaming features as the much more expensive GT-AX11000. Asus RT-AX92U: Not a real Wi-Fi 6 mesh router With the most recent firmware upgrade you can actually bind anything connected to your aimesh system to a specific node so it actually can’t jump to other nodes. Also, clients that don’t support DFS might not be able to connect to it. Keep this in mind if you intend to use an RT-AX92U as a standalone router. A Wi-Fi 5 mesh system at its core I’ve been told the S20 Ultra phone SOC has a lower total throughput of 1.77gbps so maybe that’s why it’s reporting 1.2gbps. The laptop should be reporting negotiated speed at 2.4gbps. WiFi AX200 adaptor drivers are the latest version, updated on 3 Mar 2021 to Version 22.40.0.7 Additional features for optimizing the mesh network have been added along with a number of other things.

PCE-AX3000

I would only be able to get to the satellite is via the switch… will that work? So, it would be Router –> Switch –> Satellite … it will take a bit of work as I would have to pull some new cable. It then only allows 2 channel smart connect. The only way I get 3 channel smart connect is to reset the router and configure without the node==without aimesh. The Asus RT-AX92U, first released in mid-2019, is an interesting case for two reasons. First, you only find it during the transition from Wi-Fi 5 to Wi-Fi 6. And secondly, well, I reviewed it twice. Keep the current router’s setting but use a network cable to connect the node unit’s WAN port to its LAN port.

Your content is amazing! I am now using it as my primary method of research on my hunt for a new network setup. I have a few questions because after reading your articles I have realised my initial plan won’t work. The range should ideally be 1,000 sq ft for the garage (network1), and 2,500 sq ft around the cabin (network2). My Canon E480 wifi printer disconnected to any of the AX92U units after 1 week problem free usage. I had hard reset the printer, it just won’t connect. It manages to locate the SSID, asking whether to connect to one router or multiple routers, and I tried both, it just won’t connect. I tried another wifi printer, Canon E460, same issue. My problem is that I can’t figure out why the reported negotiated speed is not reporting as 1.2 or 2.4gbps on my laptop, but instead fluctuating so wildly. This was right at my wired PC with everything connected, eveything being the cable modem, the 2 DGL-4500’s, and a Netgear 8-port unmanned switch.I understand that – when I was referring to speed I wasn’t talking about internet speed tests, I was talking about the speed and signal quality reported via the Network Connections Status info from Windows 10 (and on the equivalent from the phone). My fault for not being clear what I was reporting First of all, let me thank you for your thorough and complete review of these routers. Your knowledge, insight and thoroughness is much appreciated. Fixed DoS vulnerability from spoofed sae authentication frame. Thanks to Efstratios Chatzoglou, University of the Aegean, Georgios Kambourakis, European Commission at the European Joint Research Centre, and Constantinos Kolias, University of Idaho.