This is also helped by the Materks excellent weight distribution. Although it is heavier than the Terratek, it somehow manages to feel lighter, especially when filled with paint. With the usual three spray patterns, and three nozzles to choose from (1.3mm, 1.8mm, and 2.6mm) there’s a decent amount of versatility here, especially when you factor in the adjustable valve knob for material flow. Do also look out for sprayers which have plenty of add-ons. You’re not necessarily going to need the same spray action for each job. Can you easily switch out fittings and nozzles? If not, make sure you find a system which is a bit more versatile. Two paint cups are included – 1.2 litres and 900ml; lets you use the one appropriate for the size of your job. Wagner should be a name you commonly see at the hardware store, as they are known for making quality sprayers at affordable prices. This sprayer has a cup that can hold 48 ounces of paint and can cover almost 130 feet from full to empty.

Another element to consider is that, if you’re covering over a strong colour, this may also dictate whether another coat is required. Again, you’ll know once your fence has dried. Anything else to consider? A lot of modern paint sprayers can seem very similar at first glance, and even after a closer look. However there are a few things that can separate the wheat from the chaff, and also a few bits of information that you could do with knowing if you are serious about buying a paint sprayer for walls. HVLP paint sprayers run on either electricity from a wall outlet or a battery or else must be attached to a separate air compressor for power. Typically, these sprayers have a built-in cup to hold the paint, rather than drawing paint from the paint can. They are slower than airless paint sprayers but create a smooth coat of paint without much waste or overspray. If you fancy going all out on your latest DIY paint project then this powerful airless paint sprayer could just be what you're looking for. The sprayer also comes with a shoulder strap for its external turbine, meaning that if you’re likely to feel fatigued while spraying, you can take a load off as you desire. It’s multi-purpose, too, meaning you can use it for paint, varnish, staining and oil.

Not only is it a hassle to get the whole of a fence evenly covered, but it can also be a real task getting into those annoying little corners! Lily Anderson is a writer at Bauer Media, where she tests products for titles such as Heat, Closer, What’s the Best and Mother&Baby. Variously called “pressure sprayers”, “paint sprayers”, “spray guns” or “pump sprayers”, these labour saving devices are made by the likes of Ronseal, Cuprinol, Wagner and B&Q. This pump sprayer is specifically built to help you spray down fences in Ronseal staining. Therefore, it’s a little different to the others we’ve looked at so far. However, with two speed settings allowing you to stain a panel in under a three-minute spray, it’s going to appeal to many garden owners.

As a paint sprayer for walls and ceilings it leaves a nicer finish than the rest but takes longer than a roller! It’s hard for me to recommend this unless you want to produce the best possible result for the lowest price, and then that is where this fits in the food chain! It’s so easy to use and setup though, just push the paint pot into the turbine and go. Really that easy – removing the paint pot from turbine took me some doing though – more on that later.The Finish Max, as the name implies, is ideal for thin liquids including finishes, so if you are looking to paint your fence rather than stain it, expect to be a little disappointed.