Upgrade your domestic heating boilers and decorative fuel effect fires with the innovative Stadium Core Vent BM418B. This ventilation solution combines sleek design with advanced features to provide optimal performance and comfort for your living space. BM418B stadium core vent brown outer cowl and brown internal grille 5″ 71K, complete with anti draught baffle. This anti draught air vent is used for Domestic heating boilers and decorative fuel effect fires – Vario 100 The external cowl minimises uncomfortable draughts, reduces noise and light from outside the property and acts as a barrier against wind driven rain whilst providing a free area of 100cm² and is available in both brown and terracotta. Nighttime Comfort: Discourages night-flying insects from entering your home, creating a peaceful environment. Whole house mechanical ventilation with heat recovery (MVHR) has become the ventilation ‘must-have’ for self build projects. (That said, such systems are not suitable for all new homes — more on which later.)

prevents the build-up of excess levels of humidity (which can lead to condensation, mould and can consequently result to health issues)Samdo Sintered vents are inserted into molding dies to assure sound castings. They allow the escape of gas and prevent the passage of smelt. With roof ventilation systems including ridge vents, hip vents, our very own Roof-2-Wall Vents, the IN-Vent, the purlin vent for metal roofs and the Revolution Rolled Ridge Vent we've got your roof and attic ventilation problems solved. And don't forget about our rain screen siding vents, including the Sturdi-Strip and new Sturdi-Batten. Cor-A-Vent has been a trusted name in home ventilation since 1976. Internal doors must be open to allow the passage of air to move through the home, enabling cross ventilation

Acoustic lining reduces sound by 45 dB with internal panel fully open and 50 dB when closed (Dn,e,w). These are still significant savings when compared with MVHR systems, especially in homes where the heat recovery element would not be effective and ductwork would simply not be practical to install. Passive Ventilation Shalco Super Vents are self-cleaning and feature an opening rate of more than 43%. Using these vents will solve the problem of clogging which can affect the continuous operation of a core molding machine during no-bake molding. The 43% opening rate (compared to an average of 13% for slotted vents and 30% for screen vents) results in more effective and efficient venting. THese vents offer a slot width of 0.010″ From the bottom of your siding to the peak of your roof, Cor-A-Vent, Inc, manufactures ventilation products to protect your home from damaging moisture from within and from without - From the Ground, Up!Unobstructed Appliance Operation: Facilitates efficient air intake for your appliance, optimising its performance. The kit includes a cowl vent for exterior use, a louvre grille for inside, a 350mm length of pipe duct and an optional anti-draught baffle. This baffle reduces the airflow and also the feel of a draught through the vent. The Louvre fits on the internal wall and, similarly to the cowl, reduces draughts, noise and light penetration, while providing a free area of 100cm², it is only available in white.

If there is no wind then the home may not be ventilated, and conversely if the wind is blowing hard then the home could be over ventilated One of the key benefits of MVHR is improved air quality. Plus, the removal of pollution and airborne allergens, such as pollen, means such systems are highly beneficial for allergy suffers.

Noise Reduction: Acts as a sound baffle, absorbing and reducing external noise, creating a quieter indoor space. This slotted-style vent is machined from steel and is used in flat and contour surfaces. Sold in bags of 100 vents. The Manthorpe 5" Core Drill Vent G900 is designed for use when ventilating a gas appliance, but can also be used for general through wall ventilation. There really are as many ways to install the Cor-A-Vent Soffit Strip S-400 as there are eave construction details. The 1″ x 1 1/2″ x 4′ cross section gives you maximum soffit/eave ventilation in a minimum space. There are 10 sq. in. NFVA per lineal foot and the S-400 fits in narrow spaces where other vents can’t, like zero overhangs. The vent is s elf-cleaning – the vertical flute orientation doesn’t show the dirt. Sold in 24 4-foot pcs. per ctn. (96 lin. ft.). It is also c rush resistant so you can install with a power nail gun. Pair it up S-400 with any of COR-A-VENT’S ridge vent products for an unbeatable system that c an be installed in multiple layers for additional ventilation. Adjustable Airflow: With a 100cm² squared free area (adjustable to 70cm² with the supplied anti-draft baffle), the Stadium Core Vent ensures efficient air circulation for up to 21kW input, enhancing heating efficiency.