The T20S can be paired with either the 0.8 Ohm or 1.5 Ohm coil from the Prism S coil range and both will give a full flavour. 0.8 Ohms will produce a moderate amount of vapour, whereas the 1.5 Ohm version is more discreet and produces less vapour. With the 0.8 Ohm coil we'd recommend an e-liquid with a mix of around 50% - 70% VG and for the 1.5 Ohm coil we'd suggest an e-liquid that's 50% PG or higher. Capable of holding up to 2ml of e-liquid, refilling is made simple thanks to the top filling mechanism that features on this tank. I think as a starter or intermediate kit is where this excels. A smoker would find this very satisfying and it totally performs in the same tradition as its predecessors the T18 and T20 – being a great starter kit to advise someone to buy.

So you have the T20 electronic cigarette from Innokin, part of the Endura range. The kit will look like this one at the link here: I did find however I kept pressing 5 times to turn on and off as this is the norm for most E-cigs! How To Fill The Prism T20-S Tank Due to their handy push-fit design, it's easy to change the Prism S coils in your EZ Watt or Endura T20-S Kit.Would highly recommend for an existing vapour looking to make the jump from something like an Innokin T18E. Someone who just wants a bit more power or a few more options with their vape - especially those who really want to try 70/30VG liquids but who doesn't want to spend a fortune, or doesn't really want or need a big high powered mod - this little device is really very good. Previous Endura Models have lots of fans who use them to stop smoking and this is a wonderful update to the range.

Something as small as the coil having an E on the end would mean a totally different coil. In this post, we are going to cover the Zenith series, iSub and the T series to help you find the correct coil for your device. Really simple operation, press the fire button to vape – no other settings or adjustments to contend with. The T20s kit is another starter device, with a 1500mAh battery. It is ideal for new vapers as it has a mouth to lung draw and works best with high PG vape juice. They are designed solely for the use within specific vaporiser tanks from Innokin. You should not use another coil that isn’t meant for the device. There are so many variations of coil when it comes to Innokin. Why so confusing? We don’t know, ask Innokin! Innokin is known for making the following vape kits WARNING: The sale of Tobacco products or electronic smoking devices to persons under 21 is prohibited. Nicotine is an addictive substance. This product has not been approved by the U.S. FDA as a cessation device and therefore should not be used to quit smoking. This product is not intended to diagnose, treat, cure or mitigate any disease or medical condition. Do not use this product if you are under the legal age of smoking or if you are sensitive to nicotine or inhalants. Do not use this product if you have or if you are at risk of having any respiratory conditions, heart disease, high blood pressure or diabetes. Consult your doctor before use if you have any medical conditions. Do not use this product if you are pregnant or nursing. Discontinue use of this product immediately if you experience symptoms such as nausea, dizziness, a weak or rapid heartbeat, vomiting, diarrhea or any other negative physical symptom . If any of the aforementioned symptoms occur, seek medical attention immediately. The electronic cigarette has never been tested or proved to be a cessation device and is not sold or marketed as such.

Bank Holidays

Head here if you just want to shop for Innokin vape: Shop Replacement atomisers Are all Innokin coils the same? Why so confusing? Later models of the tank and starter kit have a 1.5ohm coil included – this wasn’t in my kit so was unable to review this. The Prism T20-S Tank Performance