The Mini 3 isn't just light, it's also quite small. It uses the same airframe as the Mini 3 Pro (minus the obstacle sensors), so it folds down to slide more easily into a camera bag. At 2.4 by 3.5 by 5.7 inches (HWD) when folded, it's not much bigger than an average 24-70mm lens or a thermal water bottle. When traveling with batteries, keep their power level low. It is recommended to discharge them to 30%. Before takeoff, connect the drone to the remote controller and mobile device. (There is no need to connect the mobile device for DJI RC.) Connect the two-way charging hub to a power outlet using the official DJI cable and charger, such as the DJI 30W UBS-C charger. Balanced Charging: When the battery is charging, the cells are automatically balanced for equal filling.

When connected to AC power through a USB charger, a new interesting feature of the two-way charging hub is that you can now also charge the remote controller through it. The use of a dry powder extinguisher is the correct method for putting out this kind of fire. The fire and any oxygen it has will be smothered by this extinguisher. It is recommended to set the RTH Altitude higher than the height of obstacles in the surrounding environment to avoid collisions during RTH. It is recommended to set "No RC Signal Action" to "RTH" under the remote controller Settings in the app. (The aircraft will automatically return to the Home Point when the remote controller signal is lost.) Like the Mini SE and Mini 2, the Mini 3 Pro has been specifically designed to weigh less than 250g in flight. So, at 249g when loaded with a microSD card and Intelligent Flight Battery, it falls into the category of drone that under UK law can be flown in public places, within 50 metres of people and above people.

Why buy from an official DJI seller?

Press the power button on the aircraft and remote controller for one second respectively, and the status LEDs will light up. When only one LED is on, please charge the device in time.

This accessory can charge up to three intelligent flight batteries sequentially, which means one after the other. They are charged from high to low power levels. Do not fly the aircraft near areas with magnetic or radio interference, including Wi-Fi hotspots, routers, Bluetooth devices, high-voltage lines, large-scale power transmission stations, radar stations, mobile base stations, and broadcasting towers. Otherwise, the wireless transmission performance of the aircraft may be affected by interference, and the aircraft cannot fly normally. Step 2: Put out the mobile device holder and choose an appropriate remote controller cable based on the type of mobile device. Then connect the mobile device. So, if you want to use additional batteries, here is a table that will help you determine how long they will need to charge: Number of Batteries

DJI's Fly and Safety Features

Replacement at an Additional Low Cost] The 1-Year Plan provides up to two replacement units at an additional low cost, while 2-Year Plan offers up to four replacement units. DJI recommends that you fully charge the batteries every time you use them. To do that, only official cables and chargers should be used. If you own a consumer camera drone or are thinking about buying one, chances are it’s made by DJI. The Chinese company is far and away the market leader in this area, and the arrival of a new model in its most compact, most budget-friendly Mini line is something aerial photographers and filmmakers have been awaiting for some time now. Due to its larger capacity of 3850 mAh (compared to the standard battery’s 2453 mAh), the Plus battery takes a little longer to fully charge. Auto-Discharging: When the battery has been inactive for more than a day, it automatically drains itself to prevent swelling, bringing the charge down to 96%. After nine days of inactivity, this will be reduced to 60%.

It takes approximately 56 minutes to charge an Intelligent Flight Battery with DJI 30W USB-C Charger and the Battery Charging Hub (and approximately 1 hour and 18 minutes to fully charge an Intelligent Flight Battery Plus).Charging the standard battery with the DJI 30W USB-C charger should take around 1 hour and 4 minutes. This is 18 minutes shorter than what it takes to charge the battery of the Mini 2. Comprehensive Coverage] DJI Care Refresh covers collisions, flyaway, water damage, natural wear, and other accidental damage. The battery will enter hibernation mode if depleted and stored for an extended period of time. Recharge the battery to bring it out of hibernation.

Hibernation mode: The battery enters Hibernation mode to prevent over-discharge of the battery cell voltage to less than 3.0 V or the battery level to less than 10%. You must charge the battery to start it up. Image Credit: DJI – Charging the DJI Mini 3 Pro directly with the USB Type C cable. How long do DJI Mini 3 Pro batteries take to charge? The Mini 3 Pro has a much-improved camera in comparison to its predecessor. While it isn’t able to offer the gloriously rich 10-bit footage you can capture with larger drones, it’s certainly the best we’ve seen so far from a sub-250g model, and super-impressive considering the tiny size of the camera module. There are three flight modes available: N (normal), C (cinema, which reduces flight speed to ensure smoother video pans and moves), and S (sport, which increases speeds to maximum and removes all obstacle sensing). The drone flies swiftly (up to 16m/s in S mode) and stably, with a prompt response to the user’s control inputs. As DJI Mini 3 does not come with an adapter, please refer to the following content to select an appropriate adapter.APAS 4.0 is not available while recording4K/48fps, 4K/50fps, 4K/60fps, 2.7K/48fps, 2.7K/50fps, 2.7K/60fps, and 1080p/120fpsvideo. Go to 「“...” > Transmission > Enable Livestreaming」to broadcast the camera view in real time. DJI Mini 3 supports livestream platforms and multiple resolutions for you to choose from and connect with your world face-to-face at any time. Only fly in authorized areas. Stay well away from GEO zones and restricted zones to prevent your drone from entering these zones by mistake and getting flyaway. As we all know, there are two types of propeller/motor: CW and CCW, and you can easily recognize it through the mark on it. Before mounting the propeller, better confirm the mark on each first.