A 1 7/16" socket is roughly equivalent to a 38mm socket, which is the closest metric size that will fit. Non-impact (standard) sockets will bend or break when used with an impact tool, such as an impact socket wrench. sockets are commonly used for various automotive tasks, such as working on the suspension components and some axle nuts of European and Asian vehicles. Regular sockets are commonly made from the steel alloy chrome vanadium, though others might be made from or plated with beryllium copper or aluminum bronze. Machine Mart Limited is authorised and regulated by the Financial Conduct Authority, register number 703528 and acts as a credit broker and not a lender.

Combined together they provide more torque leverage than a simple spanner, helping you to tighten or remove nuts and bolts with less physical effort. A 12-point hex socket also fits around a hex bolt; this is also known as a bi-hex or double hex socket. The Laser 4376 14mm 3/8" Drive Thin Wall Spark Plug Socket has been especially designed to be used on most Citroen vehicles as well as vehicles with Bosch spark plugs, such as the BMW E90335I N54 engine. The Laser 1583 18mm 1/2" Drive Spark Plug Socket is perfect for working on unusually sized spark plugs that are becoming more common and a variety of motorcycles. While regular sockets may be made from steel alloy, impact sockets have a hardened carbonized surface, also known as heat-treated or drop forged.to standard = use a 1 11/16" socket if you have specialty sockets, or a 1 3/4" if you only have common sockets. Remember: These are not exact measurements, they are rounded to the nearest socket size that will fit nuts and bolts. There are two main classifications of sockets and a few different types of sockets, each with significant differences that make them suitable for specific jobs.

It is important to match the socket size and type with the size and type of the tool and the size of the nut or bolt. This can be dangerous and cause injuries or damage to the tools or piece of machinery being worked on. This is necessary when working with hardware like bolts and nuts that use different measurement standards. With similar applications, socket wrenches are also needed in Civil Engineering, Marine Maintenance, and Aerospace Industries.Many car and motorcycle enthusiasts like to keep a or ratchet socket and a socket wrench set in their garages or in their cars for quick and easy maintenance and repairs. Metric to standard socket conversion is the process of adapting tools to fit fasteners with different measurement systems, such as converting between metric and standard (imperial) sizes. Duologi is the trading name of Specialist Lending Ltd, which is authorised and regulated by the Financial Conduct Authority (register number 774712).

Impact sockets need to be able to handle heavy vibrations, and are therefore commonly made from the more pliable chrome molybdenum. A 36mm socket is approximately equivalent to a 1 1/2 inch socket, which is slightly larger but the closest standard (imperial) size. There is no exact conversion between measurement systems when it comes to sockets (or ratchets, spanners, wrenches etc) so a chart of the nearest fitting socket is useful.The Draper 16706 is a 12 point socket manufactured from chrome vanadium steel that has been hardened and tempered for reliability and is completed with a polished finish.

A 30mm socket is roughly equivalent to a 1-1/4 inch socket, which is the closest standard (imperial) size that will fit.Hex sockets, an abbreviation of hexagonal, are another socket design consisting of two types, 6-point, and 12-point. This socket size conversion chart simplifies converting sockets between metric and standard, helping you figure out which socket to use.