Only if by some miracle the soundbar responds to one of the Samsung TV or audio codes built in to your Sky remote control. You have to repeat for all the buttons to program, once you have done to all the functions which you want and finally press the “Setup Button” Again to finish the session. As it stands then, until there's more info there's not a lot that can be added without venturing off in to a lot of speculation.

Bush Product Support for Sound bars Bush Product Support for Sound bars

There are three simple ways to setup or to configure a universal remote and the first one is Using a Keycode, Programming Via Universal Remote Code Search and Manual Setup. That’s all, your TV will work perfectly now with the universal remote control, if your device is not working then try to repeat the same procedure with the different code from the same part of the reference table. Confirmed: works with INSIGNIA Soundbar NS-SBAR-A, NS-SB314, SB212, with Comcast remotes) SAMSUNG SOUNDBAR REMOTE CODESSIDE NOTE: In search mode, the remote control will send IR codes from its library to the selected device, starting with the most popular code first. If you cannot find the answer to your question in our FAQ section, please send our Customer Support Team a web form with your question.

Replacement Remote Control for BUSH 100W 2.1Ch Soundbar With

By using the keycode we can easily program a universal remote and the keycode identifies the make and model of your equipment. Enjoy crisp and clear sound performance with our All In One Bluetooth Soundbar. Space saving and sleek with a glossy finish, it's a smart choice. Plus with HDMI and USB ports as well as wireless connectivity through the smart feature, you can enjoy your music, shows or films just the way you like. Now press and hold the “Setup button” of the Universal Remote until it shows the “Light Flash” (It means it is in “Learning mode”) A Harmony is a customisable remote control. It can be programmed to control the Sky box but talk to the soundbar for audio control, and do so as if the soundbar and TV were connected by ARC. Confirmed: works with Samsung Soundbar HW-FM55C, FM550, HW-HM45 and Xfinity remotes) SONY SOUNDBAR REMOTE CODESIf the above two methods can’t be helped to you then the final method is “Manual Setup”, if you configure the universal remote control manually your device can work perfectly. Once you’ve done this procedure, just “point your remote at the TV” and then “Press And Hold The Power” button Now your “TV Volume Up” button has been saved to the Universal remote and you can use the volume button. The product must be correctly installed and operated in accordance with the instructions contained in the manual. When connecting the Sound Bar, you can plug your soundbar directly into the Cable box, SAT box, or TV. Different programming methods may be needed depending on how your soundbar is connected.

Bush SR210-12 2.0Ch All In One Bluetooth Soundbar - Argos Bush SR210-12 2.0Ch All In One Bluetooth Soundbar - Argos

Press Power and aim the remote control at the sound bar and press CH + one or more times until the sound bar turns off.PLEASE NOTE: If no remote codes work, get a Harmony 350 universal remote to control all your devices including the sound bar. Turn on headphone volume on the connected device. If a TV, this is usually found within the sound menu. Presumably if the soundbar is hooked up using HDMI ARC - which means the TV volume controls the soundbar, then that would also work?