Push the pencil through the mark, this will mark the wall. Turn the cardboard over and then you will be able to install the adhesive hook. There are some brands that create curtain rods which tap behind the wood trim of your window. Then you will be able to install the curtain with ease. It’s actually a very convenient system and it works incredibly well. It might require a bit of adjustment based on your window size, but for the most part it’s really convenient and simple to use. In addition, you’re not making a huge mess. You retain the integrity of the wall by not drilling, and the results are still great in the end. This is the best of both worlds, and the outcome is very exciting because of that. You just need to measure and then use the hanging method that suits your needs.

These instructions will help you how to hang curtains with Command Hooks securely, evenly, and without causing any wall damage. 4: If the hooks’ tops are excessively lengthy, cut them down. You can use tension rods, command hooks, Velcro strips, curtain clips, or ropes/twine to hang curtains without a curtain rod. Consider the weight of the curtains and the materials used for a secure attachment. Q: What is the heaviest thing command strips can hold? Adhesive hooks are excellent if you have heavy curtains. Ideally, these hooks can hold up to 16 pounds each, so even the heavier curtains will work just fine. Normally you need 2 adhesive hooks for every pair of curtains that you want to hang up. The way you add them is via cutting a right angle from cardboard, and then you align it with the window corner.You just need to press on the hook for around 30 seconds or a bit more, just make sure that you remove the adhesive strip first just to be safe. Once you installed the adhesive hook, you should let it dry for around half an hour or more. Command strips can be strong enough for lightweight curtains but may not support heavier curtains securely. Follow weight limits and consider traditional curtain rods for heavier curtains. Q: How can I hang curtains without drilling the wall? The real hooked portion will show up against the curtain rod if you paint the complete hook to match your wall. By leaving the original color on the hooked portion, you can assist it in merging into the rod. Cut a length of masking tape, and then wrap it around your Command hook’s hooked portion. Reaching the rectangle or oval to which the hook is fastened will cause you to stop. This is How to Hang Curtains with Command Hooks. 3: Apply paint primer made for plastic surfaces to the hook.

That also lowers the cost of hanging net curtains, which is always a plus. It makes a lot of sense to use this approach especially if you don’t want to spend a lot of money.

The curtain can now be hung from the rod. The kind of curtain you’re using will determine how you do this. For instance, while some curtains simply glide onto the rod, others require the use of curtain rings or tabs to keep them in place. This is How to Hang Curtains with Command Hooks. How to Hang Curtains with Command Hooks: Painting Command Hooks 1: Wipe the hook down with rubbing alcohol. As of my knowledge cutoff in September 2021, Command strips are designed to hold various weights depending on the specific product and size. Generally, the heaviest weight capacity for Command strips ranges from 5 to 16 pounds (2.3 to 7.3 kilograms) per strip. How to Hang Curtains with Command Hooks.

The hooks are prepared for usage once the paint has dried and sealed. Since they are not frequently used, there is no need to seal them. Sealing the hooks could actually damage any metallic surfaces. Make sure to pull the tape away from the hook in a straight upward motion. You run the danger of chipping the paint if you drag it across the painted portion of the hook. If there are any paint chips, fill them in with little extra paint and a small, pointed brush. This is How to Hang Curtains with Command Hooks. 6: Give the paint time to dry if necessary.

This item is sold and dispatched by a Range Plus Partner

Add the curtain rod on the adhesive hooks and see if it all holds well. A bit of trial and error might be needed here. However, if you made the right measurements, you should be just fine. Still, it’s important to test out everything before you install the curtains. Hanging Heavy Curtains without Nails You also get to add an amazing visual appeal to your home this way. It’s simpler and more convenient, while still bringing in extraordinary results. You get to style your home the way you want, without having to deal with drilling or anything like that.