Intermediate switches are very versatile, and can be used for most lighting situations, but in reality it is more expensive, so you would normally only use it when needed. That is when you have three switches controlling one light, then the middle one needs to be an intermediate switch (the others need to be two way). Do I need an intermediate light switch?

If we want to change an existing switch, then note down the position of the terminals as well as the position and connections of the cable. With this in mind, this DIY project looks at the different types of light switch and what each should be used for. Rules and Regulations for Electrical Workan intermediate switch should be fitted between the first and the last light switches on the circuit. The na_srp cookie is used to recognize the visitor upon re-entry. It allows to record details on user behaviour and facilitate the social sharing function provided by Addthis.com. If replacing an existing switch, note the location of the terminals and the colour and position of cable connections. Pattress – This is the box that contains the parts of the light switch. Make sure that you get the right size face plate to fit on the pattress that you have fitted

MediaMath uses this cookie to synchronize the visitor ID with a limited number of trusted exchanges and data partners. It will be connected to the face plate screws so that they are earthed and will not carry a current. Bridge

When do I need an intermediate light switch?

White plastic switches are often the default switch people go for but consider if other colours and finishes would suit the décor better. For example, brushed or polished chrome or slate grey are perfect finishes to match contemporary décor. Or if the décor is more traditional, there’s antique brass or wood effects. Also, think about how the colours will complement or match other items in the room, such as appliances, door handles or window openings. And don’t forget, you can choose different colours and finishes for different rooms if necessary. Note that this is the case if a domestic light pendant is available for the exam. If the light is anything different, then you will have to use Push-In connectors or regular connectors (instead of the otherwise available connectors) to make all the necessary connections. The rules on what you can and cannot do to the electrics in your home are extremely strict, however when it comes to changing light switch faceplates and a few others, you are allowed to do this without the assistance of a qualified electrician.

This is the metal strip that connects the earth terminal and therefore earth wire to the face plate screws. Terminals However, if you need two switches to control a single lighting circuit, in the same manner that you would have a switch at both the top and bottom of a staircase to control a landing/stairway light, you need to use what’s known as a 2 ‘way’ switch. At this point you will have the Line wire of the supply cable still not connected. This wire needs to be connected to the available spare connectors. Do NOT connect the Line wire to the Line terminal because then your light would be permanently ON. What we need is to utilise the two-way and intermediate switching available.The light point can be controlled from three locations with the help of 2 two-way switches as well as an intermediate switch.