Even in extreme environments, Snap-Caps can be expected to last for 10-15 years, all the while protecting the screwhead against corrosion.

The staff was very helpful and efficient The snap caps were used to cover the screws which hold the toilet down and were just what was required. Colours marked (M) are a metallic colour - they have a metallic "fleck" throughout them, similar to metallic car paint. For the type of plastic used for Snap-Caps, these changes to the behaviour of the plastic are most noticable when the plastic is below 15°C.Was supplied with a colour matching sample pack before I chose the cap which made colour matching easy. With so many different Egger product ranges, we (Cover-Caps UK) have decided to focus on the Egger Range 2020-2023. The Fix: Before using, simply warm the caps in an 'inside' pocket (ie close to your body), or in an oven or similar warming device to a maximum of 100°C.

If you have any additions to this table, or disagree with any information, please contact our Technical Department.In essence, once water enters a space (because it is not sealed properly) instead of the water evaporating out again later, it becomes water vapour and remains in the space for a much longer time. Ensure you are using the correct Washer type for the head of the fixing - you MUST use a CSK Washer with Countersunk-head fixings, and F/B Washer for all "flat-bottomed" fixings such as pan-heads, flange-heads etc. While all care possible has been taken in tabling this data, we accept no liability for any inaccuracies, omissions or currency of information contained herein.