It might sound like a simple job, but it’s easy to damage walls or electrics when attempting to remove old skirting boards. Doing this at regular intervals along the wall (approx. 6 inches) will help to loosen the board as much as possible. It also breaks the seal created by decorators caulk between the wall and the board. This is almost always used when decorating to create a clean finish and fill any small gaps that may be present and look unsightly.

Fume Precaution: The fumes from chemical strippers can be hazardous. Always work in a space with ample ventilation, and consider using a mask for an added layer of safety. If your walls are quite extended and you are faced with meters and meters of moulding, you may wish to start by just cutting sections of it before you actually remove it off the wall. Maybe you just need to get rid of a small section of the board. In any case, you can do this by using a power drill. First of all, draw a line to use as a reference for cutting and drilling. Then, very carefully drill holes along the cutting line and finish the cut with the chisel. Should you remove skirting boards before laminate flooring? You have to take your time to consider the size of an electric sander. It determines how comfortable and easy it would be to handle this tool. If you are going to work in tighter spaces, a compact electric sander will be the best.If the nail isn't removed easily, we would recommend hammering them flush into the wall. This will prevent damage to the plaster and also enable you to fit the new skirtings perfectly! Take care here as there is always a chance that a pipe or cable may be hidden in the wall. Step 5 - Clean The Area Before Installation Before covering them, ensure skirting boards are free of dust and dirt. A clean surface ensures that masking or painter’s tape adheres better. Do you want a tool that has the speed of belt sanders along with the smoothness of orbital sanders? A random orbital sander brings this perfect combination for you. It comes with sanding discs that will orbit while simultaneously rotating. A belt sander is the most effective for removing plenty of material. It works well by shaping skirting boards. Belt sanders work with an abrasive paper belt that is stretched through its rollers.

Using the metal scraper or putty knife, gently peel away the paint, working methodically across small sections. The choice hinges on the paint’s characteristics and the wood’s condition. Every method mandates specific tools and materials, underscoring the importance of preparation. An electric sander is the best choice for your skirting boards. It works efficiently to give you the best results. You can get a smoother finish with its help. Moreover, it makes your task almost effortless and saves you a lot of time.The first step for removing a skirting board is to make sure you have all your tools at hand. Then, make sure all cables or attachments connected to the skirting board are removed. You’ll be using force and sharp tools to take the board off the wall, which can cause electrical damage if wires and cables are not removed beforehand. You'll also want to put aside any objects around the area, and cover the floor with an old piece of fabric or a soft plastic sheet to prevent any damage. Overexposure to vibrations can also be very dangerous to you. There is also a possibility of permanent damage to it. Make sure to follow all the usage recommendations from the manufacturer.

It has a good oscillation speed that can smooth all the rough edges and surfaces. You can adjust its variable speed from 7,000 RPM to 12000 RPM according to your needs. Moreover, you can use this tool comfortably. It comes with a compact handle for a better palm grip.Are you worried that sanding your skirting boards may leave some gouges and swirl marks behind? This orbit sander prevents this with its power control systems. You can set it at six different speed settings. This orbit sander also reduces vibration. Its bearing system can decrease it by around 25%. It makes this tool very smooth to use. Pros

If you prefer a detail or multi-sander, this electric sander is one of the best out there. Whether you are a professional or a beginner, it works well for everyone. It is lightweight and compact. This makes it very easy to use.But if the skirting boards have been damaged and need a lot of repair – which can be time-consuming – then it's best to replace them. However, if they are an original feature in an old house they might be hard to replace so you will need to put in the time and effort to fix. Now that you've read our guide, you should be confident enough to go ahead and remove the skirting! With that being said, now we'll answer some common questions in relation to the process. Why Would You Need To Remove Skirting Boards? Insert the crowbar carefully between the wall or floor and skirting board, and gently pull away from the wall. Continue this step all along the wall at 6-10 inch intervals until the skirting has been detached. There are numerous electric sanders available in the market. How will you choose the best one for skirting boards? Its base plate comes in various sizes. You can select the one that works the best for your skirting boards. Additionally, they are usually not very expensive. Random Orbital Sander