These are the modules available to you in ELMConfig, most of them are pretty self explanatory. Not all modules will be fitted to all cars, for example, only the Kuga will have the AWD module. If your car doesn’t have a module, it doesn’t mean that it can’t be fitted and the functionality added to your car. There have been success stories of people adding cruise control to cars, and enabling it using ELMConfig. MS-CAN GEM ELMConfig can't open a connection to the adapter at all, no matter which mode or laptop I try (Yes, FORScan is closed when I try to use ELMConfig). In all cases, it pops up an error saying "Correct response from adapter timed." Usually, the request and response are both empty, as in this screenshot I took:

Module Initialization" sub-function of service function BCM/BdyCM "PATS Programming" (experimental!) for: If you have an older car, you will need to verify the OBD2 protocol of your vehicle. This will ensure that your scanner and ELM327 software is compatible with your vehicle.Do not change any options with RCM airbag module unless you know what you are doing""¦. Lets not switch any airbags off eh?

Please FIRST move the unextracted folder to your Desktop, else below #2 step won't show "Install" option. While the Car Scanner ELM ODB2 is still in Beta version as I speak, it managed to work very well in our Windows laptop and smartphone. We were able to diagnose the OBD2 fault codes and read the sensor data in our fleet of test vehicles without encountering unusual errors. Before I read that, I was going to suggest you set it in the button test beep mode, to see if your steering wheel buttons are communicating with the car. After you’ve paired the app with your scan tool, you can begin car diagnostics! image courtesy of Chris Running the Car Diagnostics with the ELM327 softwareThe GEM Tab or (BCM) , This will not connect , and i'm Guessing that it needs the Wiring MOD before it can connect to the High CAN BUS. Delay time for “Theatre”/Courtesy (interior) lighting fade from/to (0.01-2.55 sec) – Make the fade longer or shorter I became particularly fond of the OBD2 system on modern cars. If your vehicle is 1996 or newer, you have an OBD2-compatible car. Without the OBD2 diagnostic system, it will be extremely hard to pinpoint the nuances in your car’s engine. When something goes wrong, it will all turn into a time-consuming guessing game.

Service functions HVAC "Actuators Calibration","Reset the Outside Air Temperature Sensor Learned Values" for:ScanMaster-ELM is a OBD-2/EOBD diagnostic scan tool for vehicle diagnostics under OBD-II/EOBD standards that were developed specifically for the ELM327 chip from the company ELM Electronics. In conjunction with an ELM327 based interface ScanMaster an ideal OBD solution (also scan tool or OBD scanner called) to diagnose all OBD-2-capable systems and is very suitable as well for automotive repair shops, even for seasoned home and hobby mechanics. All control devices in vehicles that support OBD-2... PCMSCAN for Windows Ensure there is NO yellow exlamation marks (that looks like this ) next to devices such as: USB-Serial CH340 | FT232R USB UART Prolific | USB-to-Serial | USB Serial Port | USB2.0-Serial | Silicon Labs CP210x USB to UART Bridge HS-CAN mode. Needs two modules to modify. (This was already enabled from factory on mine but this how you do it) EDIT* NOTE PuTTy is not needed for ELMconfig Program , once Elm327 is connected then select configure from the menu on startup of ELMconfig , this will send all commands to re-configure your ELM327. This update will enable a system which tries to detect a deflating tyre. This system does not use sensors in the wheel, instead it uses the ABS wheel speed sensors to detect when a wheel is rotating at a different speed to the others when it shouldn’t be. A deflating wheel will have a smaller circumference, so will rotate faster than the other wheels. This may not work on all cars.