Marine Grade Lanolin – an environmentally friendly, natural, high performance lanolin lubricant, corrosion Inhibitor and anti-seize grease I power hose it and wire brush it first but if its heavily scaled I think the waxoyl doesn't penetrate into it. Parked it up on ramps in the garage so I had access to the underneath and spent time with rags and the airline drying and cleaning off the underside. I have been considering using Lanoguard as it doesn't cover up any existing rust as conventional underseal does and it doesn't compromise the original finish applied by Volvo. Did the complete van, rear to front, including taking out the head lights to do the inner wings, inside chassis rails as best I could, and what I considered covering everywhere excessively and had only used half of the quantity!

Water and Moisture Repellent: One of the key advantages of lanolin-based grease is its ability to repel water and moisture. It forms a hydrophobic barrier on the metal surface, preventing water from reaching the metal and causing rust. This is particularly important for vehicles that are regularly exposed to rain, snow, or wet conditions. The other thing I would recommend is remove your wheels and put the car up on axle stands, it makes it easier to get at and you don’t end up with Lanoguard all over the inside walls of your tyres.

Ashton Marine Services are taking LanoShield the long lasting eco-friendly anti-corrosion ant-seize grease and sprays to Boatlife at the NEC 16th-19th of Feb. The lanoguard looks easy to apply with no washing guns etc and you don't have to do it all at once and easy to touch up but its twice the price of waxoyl.

Any tests on youtube is done on clean metal which is not like trying to attach to a rusty surface and I think most people using these products are trying to make a rusty vehicle last longer rather than putting on new cars. Jet wash resistant to 3000 psi or 200 bar (won't be displaced and will keep protecting after cleaning) Across the world people and companies have been using environmentally friendly Lanolin based products for a wide variety uses of rust protection and/or lubrication including:I've always used waxoyl, some people say its rubbish but if the car isn't too bad to start with i think it does a good enough job for a year, especially on floor pan. But my problem is when something is badly rusted like an axle or subframe then within a couple of weeks its gone. I'm guessing these parts are probably more exposed too. For commercial use e.g. lathes, chain, farm machinery, aquaculture etc. our tip is to use a little as it goes a long way. Brushing is one method but others include: For larger areas like bulk heads either use our spray or simply a larger brush but as you only need a thin coating spread thinly. Please note that if you prefer a thinner grease i.e. more like a gloss paint consistency LanoShield can be heated up by placing the jar in a microwave for 30 seconds on full power Fishing equipment

This is often applied to large areas and hence using the spray version works best. Your other option is heating the grease up to make it softer and then wiping it on as if washing the machinery. Please remember to wash off dirt first for best results Bikes This is marine standard and has the highest percentage of Lanolin (the ingredient that actually stops the corrosion) we can provide and make it sprayable. This does mean it works better if stored at plus 10 degrees and it does need to be shaken before you use it. Environmentally Friendly: Lanolin is a natural and biodegradable substance, making lanolin-based greases environmentally friendly compared to some synthetic alternatives. They do not contain harmful chemicals or solvents that can be detrimental to the environment or pose health risks during application or disposal. LanoShield is a natural, environmentally friendly product that provides long lasting corrosion protection and lubrication properties to an endless variety of marine, agricultural, automotive, commercial, industrial, electrical and many more uses.I think underseal stinks as a product and actually makes things worse. It should be banned and the company sued. The stand will also have Epropulsion the market leaders in Electric inboard and outboard solutions including the new I series inboards. LanoShield is not just a natural none toxic anti-corrosion and anti-seize grease / spray but it also protects your electrical connections as it does not conduct. This means it can protect your switch boxes, battery terminals as well.

Product covers extremely well and dries to a matt finish. I would definitely recommend that the product is warmed first as it aids atomisation, especially with using the lance. The bung in the top of the container needs to be pushed in securely (soon to be replaced with a screw top) to avoid spillage. The harsh and chemical nature of these products means that they are also much more likely to have flammable properties and aren’t a sustainable, eco-friendly fit for the environment they’re applied in. They tend to be messier to work with, result in overspray in areas you don't want it (perhaps even on your own driveway or equipment etc.) and can sometimes require a lot more PPE and application tools and equipment if they are airborne or considered toxic or hazardous.

Trailers: 

Many parts of cars are prone to rust and so common areas to use LanoShield are on all bolts and nuts, bulkheads etc. As with trailers we have found the easiest way to apply this is by using a small brush and remember to cover the thread on the bolts as well as all nuts. It can also be applied to your car battery terminals to stop corrosion