Since it’s a cheaper model, the installation isn’t that easy. You can use the seat belt and the latch system. My personal preference is the seat belt because it’s easier to install. All you have to do is to guide the belt through the right hole, and you’re done. Extend the Lower Anchor Strap. For easier installation, extend the lower anchor strap to its maximum length by pressing the grey button and pull out on the strap. The main reason why Graco 4Ever is better than the Symphony is that you get more mileage out of it. From 4 up to 120 lbs., this car seat will keep your growing child safe. Parents who want to keep their kids as safe as possible in rear-facing mode can do so until they reach 50 pounds, around 4 years old. Rotate The Car Seat Into The Forward-Facing B Position. At the same time, slide the blue trigger and squeeze the gray lever. Then rotate the seat in either direction into the forward-facing position.

If you’re looking for a car seat providing optimal comfort level, the Evenflo 360 offers versatility in that regard. What you have probably noticed that this car seat is fixed. It doesn’t have any recline options. For some, this is a problem because the kid’s head could flop. The Graco has the same issue as well. Being suitable for children from birth the seat comes with an infant insert for use with children up to six months of age, which is easily removable. Connect the Lower Anchor Connectors to Vehicle’s Lower Anchors. The lower anchor strap should not be twisted. If twisted, you will not be able to tighten the strap. When it comes to seat weight it seems that Evenflo is the lightest one from them all. For example, seat weight for Graco Tranzitions is 14.97 pounds and the seat weight for Evenflo Maestro is 9.6 pounds. While the Extend2Fit car seat weight is 23.2 pounds the Evenflo Sureride seat weight is just 9.8 pounds. Either way, they are easy to install. What other features do these car seats have?Katie: This is a fab Graco Turn2Me 360° car seat that is incredibly practical and easy to use. It's easy to fit into the car with the isofix attachments so takes seconds making it easy to swap between cars if needed. The spin function means it's easy to get the baby in and out without having to reach over at awkward angles. It also means an older child can forward face or rear face with ease. If you prefer a rotating car seat that spins 360 degrees and is narrow enough to fit three across, the Evenflo Revolve 360 Slim is the best option. It’s just 16.75″ wide, as slim as the Graco’s slimmest car seat – Graco SlimFit3 LX. The installation is easy. The seat bet is straight forward. You feed it through the hole and pull it tight. The latch system made your life 10x easier. After you connected, you pull #1 up, and then you pull #2 down. You’re done.

To keep the Graco Turn2Me 3 in 1 car seat in good condition for long-lasting up to its 10-year lifespan, it is important to follow some basic maintenance and care instructions provided by the manufacturer in the car seat manual. Hollie: I would recommend this car seat to a fellow mum because of the rotating seat and the fixed isofix which was straightforward to install (when you know how). Fastening my baby into the car seat is also really straight forward and there are lots of different options to make the seat suitable for your little one e.g. booster cushion, newborn insert etc.As any parent would attest, getting a baby or toddler in and out of a car seat can be incredibly stressful but thankfully the Graco Turn2Me Isofix 360° Rotating Car Seat truly makes life easier as it does what it says on the tin and rotates all the way round (and only needs one hand to use it) and also has long, adaptable straps. First, it’s tested using approximately twice the impact force required by the US FMVSS 213 car seat safety standard. That’s the very basic crash tests that all car seats sold in the US should pass.

The Evenflo Symphony Elite has a big selling point. This is located in the installation department. You haven’t seen this before. The latches have a ratchet. Yes, you read it right. There’s a ratchet to get the tightest install possible.

Open The Door To Expose The Rear-Facing Belt Path. Press the button on the front of the car seat and lift up to open the door and expose the rear-facing belt path. Yes, you can wash the covers in your washing machine with cold water only on the delicate cycle. Drip dry and do not use bleach. Rotate The Car Seat Into The Rear-Facing Position. At the same time, slide the blue trigger and squeeze the gray lever. Then rotate the seat in either direction into the rear-facing position. The seat is correctly in the rear-facing position when the arrow points to the blue label. The company has manufacturing facilities in Ohio and Georgia, producing a wide range of baby gear and safety products. This car seat has two modes the harness mode and the booster mode. Harness mode is a fancy way of saying forward-facing.