These precautions are important for keeping you safe and preventing damage to your home. Also, you’ll want to make sure you have the proper tools and supplies on hand. This way, you don’t end up wasting time running to the hardware store when you realize you don’t have what you need. 2. Turn Off the Water Supply

Measuring center-to-center, there can’t be any less than 30” (762mm) between the bidet and any adjacent fixtures. Cleaning your toilet once a week should be incorporated into your monthly routine to minimize the risks of getting infected by using a toilet that’s infected. 2. Turn Off the Water SupplyNSF CERTIFIED - Stay Flex stainless steel 96-in long high-pressure hose with solid brass hose nuts and double crimps on both ends; stays totally flexible during use. NSF Certified brass EZ-Reach shut-off valve and T-Connector with hand tight 7/8-in handgrip nut; easily attaches to toilet without tools or a plumber; includes all parts for easy installation Standalone bidets can be divided into several categories, but the main distinction is usually made between vertical spray and horizontal spray bidets. ADJUSTABLE WATER PRESSURE DESIGN】The water pressure can be adjusted by the handheld bidet sprayer lever. Press lever gently to get soft spray to do personal cleaning, especially an ideal choice for women during pregnancy and menstrual cycles. Press lever deepest to get jet spray to wash baby cloth diaper or clean your toilet, help improve your family cleaning quality. You will fall in love with it!

There are two main types of bidets; freestanding bidets and toilet-mounted bidets. Standalone bidets are independent units. On the other hand, a toilet-mounted bidet is an attachment that can be installed below your toilet seat. Most don’t want to have to deal with connecting and disconnecting the bidet to the faucet with each use, and instead,install the attachment using an alternate shutoff valve. EASY DIY - Onto / Wall mounted toilet installation can fit most toilet. No plumber or other tools are required to attach your handheld bidet. It comes with detailed installation instructions, if any questions, we are here to provide professional help. If you’ve damaged the threads protruding from the toilet, these are part of the fill valve. You’ll need to replace the whole part to get new threads (don’t worry it’s not hard). How to prevent cross-threading:For those who want temperature control with anon-electric bidets, there are options. Option 1: The Easy Method Easy To Control】: Dual Function hand held Bidet Sprayer, Rotating the nozzle to switch jet and soft mode, as well as set control the water flow rate by the trigger easily. Soft mode for feminine bottom cleaning, baby bath or pet bath washing. Jet mode for rinsing floor, carpets, or baby cloth diapers. You can enjoy the fresh and clean feeling after use. The minimum size for a water supply pipe to bidet (via shutoff valves on the wall) is3/8”according to IPC code and 1/2” per the UPC.IPC stands for International Plumbing Code while UPC stands for Uniform Plumbing Code.InNorth America, it’s typically 3/8”. A 1-1/4″ DrainPipeIn the Floor or Wall They’ll need to be situated low on the wall behind where the unit will go. It varies depending on the brand and model, butthe valves are usually spaced about6”(or152mm) to theright and leftofthebidet centerline. Teflon tape is used to seal connections where the actual threads create the seal. In a bidet, a washer makes the seal, not the threads. In fact, using Teflon tape on bidet fittings can interfere with the fitting and cause a leak.

This can cut the threads and mean the fitting will tighten before it seals properly (resulting in a leak). If the washer and the threads are fine, then the problem could be as simple as the connection being too loose. Before uninstalling your bidet, you need to turn off the water supply to the fixture (for standalone bidets) and the toilet (for toilet-mounted bidets). Unless necessary, avoid using metallic tools like wrenches to turn your shutoff valve, as these could cause damage to the retaining bolts and nuts when too much force is applied. Like sinks and baths, standalone bidets require a drain outlet (or drain line) to dispose of used water.Drain pipes forsinks are usually1-1/4” or1-1/2”while those for bidets are almost always 1-1/4”.Today’s article looks at the different plumbing requirements for bidets. Thereare several types of bidetson the market these days and thekindyou’re planning to get will determinethe ideal bathroom setup andplumbing needs. So, it depends on the type of bidet you have. What we’ll do here is go over the differentplumbing requirementsfor different bidets paying special attention to the standalone kind as they have a more involved installation. Standalone bidets are the separate washbasins located next to toilets.

If adding/replacing the washer doesn’t work, it’s likely you have a defective head and you’ll need to get a replacement. Plumbing codes specify that bidetshave tobe installed with a water temperature limiting device that limits the discharge waterto 110°F (43°C). In other words,contractors choose pipe sizes first by looking at codes and then adjusting upwards based on their preferences if possible.Bidets tend to be 1-1/4 but other sizes are used from time to time. To fix this issue, you need to get a longer (flexible) pipe and swap it out for the struggling supply line. WATER PRESSURE CONTROL - It meets multiple uses by adjusting your lever to control pressure from gentle spray to jet spray. Gentle press mode for feminine bottom cleaning or baby bath/pet bath washing. Jet spray for rinsing floors or cloth diapers.

How to fix a leaking bidet hose

For non-electric bidets like the Alpha ONE V2 or GoBidet 2003c that use 3/8" compression threading, use the 3/8" compression brass t-valve instead.