If the number of ports is your biggest concern, the Acasis 16-port USB hub is one of the biggest. All 16 ports are USB 3.0, and they all support fast charging up to 2.1A and data transfers up to 5Gbps. There are no compromises, no ports left behind—just full functionality across the entire unit. There are also seven- and ten-port variants if you want something slightly smaller. Powered or not? Some USB hubs come with their own AC adapters so that they can provide more power than your computer delivers from one of its ports. Bus power from your computer can be pretty low, not enough to juice several power-hungry peripherals at once or to charge devices at a reasonable rate. By definition, a USB hub that needs its own plug isn’t very portable.

Output ports: Make sure you get enough ports to attach the number of devices you’re likely to need. Most USB hubs have at least 3, more often 4, output ports, but at your desk, you may need a lot more than that. Also, consider whether you are attaching any USB-C devices (most output ports on hubs are Type-A). Similar to the Sabrent HB-U3CR, the Atolla delivered 1.2 amps at 4.8 volts on our power test and it charged our phone at 4.78 volts and 1.35 watts. The Atolla hub also offered similar performance to other hubs; we detected no slowdowns when copying files with our test SSD.If you have a recent-gen iPad with a USB-C connector, you may find yourself wishing you could connect a USB Type-A device, headphones or even an external display. Anker’s 541 USB-C Hub for iPads has you covered with a unique design that’s meant to snap right into the side of your tablet or even a USB-C laptop. There’s no wire as the USB-C plug and a slight, protruding chin hold the entire metal hub in place.

Ethernet, SFP+, 8x USB, power, fan, user, 2x WWAN (if CORE module is inserted), Wi-Fi (on Wi-Fi models) It can work with various versions of the Pi, and the size of the board is designed to perfectly fit the Raspberry Pi Zero 2 / Zero W / Zero WH. Connection NotesUpstream connection (Type-A or Type-C?): USB hubs have multiple downstream ports to connect to your devices but only one upstream connector, which could be a port but is often a built-in wire that connects to your computer. Many laptops, including a lot of the best Ultrabooks, only have USB-C ports, so your hub's upstream connector would have to be Type-C. Key specs – Upstream connection: 1x USB-C; USB ports: 3x Thunderbolt 4 USB-C 3x USB-A 3.2 Gen 2; Other ports: Gigabit Ethernet, SD Card, 3.5mm audio; Power:135W power adapter; Maximum power load: 90W per port; Dimensions: 190 x 75 x 27mm; Weight: 338g; Warranty: 12 months

Unlike cheaper hubs, it supports a full 60Hz refresh rate over HDMI, while there’s a Gigabit Ethernet RJ-45 port for when you need a physical network connection. The Type-C and Type-A connections could be faster, with our SSD speeds limited to around 458MB/sec, but this is a great fully featured hub that’s still affordable and – most importantly – just works. It has a power adapter and a dedicated power supply, which makes sense considering it’s so large. It should be noted that both the power and main USB cable must be connected for it to work. The chassis is plastic, so no premium materials were used here, but it’s so big it’s hard to imagine anyone breaking this thing without some serious force. It’s about the size of your average surge protector and measures 7.9 x 2.4 x 0.9 inches. An adapter is included for connecting this with a Pi Zero micro-USB port, and a short micro-USB cable is included for all other 40-pin models of Raspberry Pi. Both USB-C and Thunderbolt use the same USB-C connection. The difference is that a “generic” USB-C connection typically provides 10Gbps of bandwidth, and Thunderbolt provides 40Gbps, with a road to 120Gbps with 2024’s Thunderbolt 5. Can a USB-C hub feel elegant? This one does. Anker’s 7-in-1 USB-C hub feels surprisingly weighty (3.5 ounces), with a premium metallic (aluminum and polycarbonate) sheen. It’s also a bit more expensive than its rivals. Anker’s hub was among the coolest we’ve tested under load, at about 87 degrees.Windows® 7, Windows 8.1, Windows 10, Windows Server® 2012 R2, Windows Server 2016, Windows Server 2019 and Linux Take some of the claims made by some manufacturers with a pinch of salt. We tested a couple of hubs that promised high-end features but failed to deliver during testing. For example, they might promise 4K at 60Hz, but you might find that this only works on specific laptops and displays. FlexiHub: Windows host device only, but any platform can remotely access the USB of the Windows host. Easiest setup. Cost-effective as it is priced by active connections, not total number of devices FlexiHub is installed on. Secure with 256-bit encryption. All MacBooks and many of the best Ultrabooks come with only USB-C ports, and just a couple of them. That’s why there are so many portable USB hubs that connect to a computer via a built-in USB-C cable and then provide a few Type-A ports, along with some extra goodies such as an HDMI out or a card reader. Anker’s PowerExpand 4-in-1 USB-C hub has one whiz-bang feature we haven’t seen anywhere else, and that’s a built-in 256GB SSD. A USB splitter refers to a simple device that splits a single USB port into multiple ports, allowing you to connect multiple devices simultaneously. This type of splitter doesn't typically have its own power source and relies on the power provided by the connected computer or laptop. USB splitters are often used for basic connectivity needs and may have limitations in terms of power distribution and data transfer speeds.

Recent laptops have begun offering a USB-C technology called HBR3 with DSC, which we’ll explain more fully in the sections following our recommendations. The bottom line is that the technology offers something similar to the DisplayLink technology below, but as an industry standard. In our experience, although the technology is somewhat supported in laptops with 11th-gen Core processors, it works best in 12th- or 13th-gen laptops.

At 4.8 volts, which is around the minimum voltage most USB devices will tolerate, we got 1.25 and 1.32 amps from the charging and data ports, respectively. When I plugged my Android phone in to charge, a real-world situation because a device will negotiate the best combination of volts and amps, the charging ports sent 4.78 volts at 1.35 amps while the data ports gave the same amount of volts, but just 0.35 amps. To make a long story short, you'll get 6.4 watts from the charging ports, which is decent but not the 15-watts that fast phone chargers provide. All three charging ports should be able to deliver this at once. Ethernet is easier, as it’s hard to find a hub that doesn’t support Gigabit Ethernet speeds. That said, a small number now support the faster 2.5 Gigabit (2.5GbE) standard, which isn’t a priority for most home networks, but a plus for advanced users or just for future proofing. This UGreen unit is another basic USB hub, with four USB 3.0/3.1 Gen 1 ports connecting through a single USB-A connection. Disappointingly, what looks like an aluminium casing turns out to be plastic, which feels a little creaky in comparison to some models, but it’s robust enough for daily desktop or mobile use. The big advantage this one has over similarly priced rivals is a 5V micro-USB input, meaning it can charge devices while in use (without any fast charge support) and run one or more USB SSDs or HDDs – we tried it with one of each without any issues. The only downside? You’ll need to supply your own charger and cable, but it’s hard to grumble at this price. Still, for Windows laptops, MacBook, and Chromebook users who only need a couple of reliable ports, this makes it onto our list of best USB-C hubs.