I need length and and a system that isn’t “rigged” because I don’t want to drag a duct taped rig job all over scaffolds, stairs, etc. Although the suction seems pretty strong in 4″ piece of flex hose, performance take a huge dump when the pipe is reduced to the size of a typical sander’s dust port. Simply attach the hose to a dust extraction machine to achieve a virtually dust-free environment when using. In my case, my outfeed table is my assembly table is my sanding table, … So the DC drop which draws dust from the table saw blade guard is very handy.

Thanks to its bigger size this hand sanding block is suitable for sanding bigger and plain surfaces. The Mirka Extractor is an “L class” in 230 volt and “M class” in the 110 volt, which is slightly better than the Festool Midi. The electric sander works stably with low vibration, low noise 75db, so you can work for hours without the hand fatigue. The sand paper seems expensive but it lasts a long time and doesn't clog up every 3 secs like cheap sand paper. It can also be used used with any traditional hole-punched paper backed abrasive sanding sheets or strips that use a hook n loop / Velcro type fastening system, however dust extraction is likely to be much less effective than using a mesh abrasive.Since then I think a few people have had issues with fine dust clogging the motor and burning it out. Mirka’s dust extractors are meticulously crafted to facilitate dust-free sanding when used in conjunction with electric and pneumatic machines and hand-sanding blocks. Whether it's sanding furniture, removing rust or detail sanding in confined and intricate areas, this sander will tackle these tasks with ease. The block also comes complete with a 20/28mm adaptor, which allows direct attachment to Mirka's Ceros and Deros hoses. Toolsave is a family run business and became a Limited Company on the April 23rd, 2004: company registration number 05109987.

I’ve been doing tests on this project in smaller, isolated areas of the house with a cheapo Rigid Random Orbital. I’ve hooked my Porter-Cable Random Orbit sander to my ClearVue cyclone (with 5 hp motor and 1 micron filters) through a 2. this alongside the ergonomic soft grip handle allows you to use this sander for those larger jobs without discomfort.Mirka Deros, like the Indasa E-Series and Festool RO150, is used for sanding walls, ceilings and other large surfaces. Offering convenience and flexibility with an innovative sanding head and 5mm random orbital movement.