If necessary, re-level the hoverboard footpads so that they are even and parallel to the floor, and so that the kart handles are positioned upwards on the diagonal.

The warranty is voided if repairs or modifications are performed without the written consent of Hover-1 or if our products are equipped with additional parts or accessories that are not approved for the Hover-1. Using any charger, other than a genuine Hover-1 charger, or a charger for a different model, voids the warranty and is a serious fire hazard. Exposure to water, moisture, mud, dirt or debris, voids the warranty.If necessary, free the loose ends of the Velcro straps and the wire on the underside of the seat kart so that they are accessible.

Position the kart on the ground in front of the hoverboard so that the side of the hoverboard with the charging port and power button are facing away from the kart.Now look for the 2 attachment holes on the front of the kart frame. They are oblong in shape and located near the end of the bars that extend out from the sides of the nose cap. Those are the holes that you will align with the screw holes on each footrest. Easy Control with More Fun: Easily Shifting accelerating, turning, and brake smoothly via 2 hand control bars. The 360° flexible PU front wheel let you turn around freely From your collection of hardware, look for the 5 washers and 5 large metal bolts. (Not the largest plastic ones; you’ll use those later.)