Take a measurement from the outer sides of the bottom, make sure the ruler is paced in center of the bottom circle.

Easy to Install】Simply insert the leg glides into the foot of the wrought iron furniture with a rubber mallet or wooden mallet, making installation very simple.They cannot be zinc plated, anodized, galvanized or metalized because when they are welded to the frame, those finishes will cause harmful fumes for the welder.

The welding will cause the part to burn so you will need to clean the welded foot after the welding by sanding, wire wheel polishing or sand blasting before they are prepared for paint. Our patio furniture glides are crafted from premium nylon and ASA plastics, ensuring the highest quality and durability. Wide Application】The furniture feet cap is suitable for wrought iron table and chair with inner diameter of 38mm/1. If you paint the chair before installing, let the paint dry thoroughly, then apply some heat with a hair dryer or heat gun insure the paint is dry. Forever Glides are designed to replace those missing plastic, pop-in, furniture glides with self leveling glides that actually stay in place.

On our chairs, the old gliders were missing, and I found a few had part of the old glider remaining inside, which I pried out with a flathead screwdriver.