Only fixed-code model can be cloned, rolling-code model which is broadly used on cars is NOT supported

Both remotes should be placed far from any wireless device that may cause interference in the copying procedure, such as cellphones, wireless modems and other devices After code clear, LED will flash once and remains off when pressing any button on Copy Remote. Code Clone

Prerequisites & Tips

Easy to use, the 4 channel remote control system lets you take control of your gadgets, car, home and garage. ABBREVIATION: The above instructions use Copy Remote as abbreviation of Solidremote Universal RF Remote Control Duplicator and Original Remote as abbreviation of Original RF Remote Control to be duplicated. Our How To Clone / Copy / Duplicate Garage Door Remote Control simple instruction manual is provided by SolidRemote Technologies Co., Ltd. as a free document to the public. If you have followed exactly the above programming procedure, but the Copy Remote does not work with your garage door opener, there are basically two major factors to consider: Firstly, your existing remote control might not be fixed code type. Secondly, your existing remote control and Copy Remote must transmit signal on the same frequency. The frequency is factory preset to 315MHz which is the standard for radio remote control apparatus in USA and China. The frequency can be changed to anywhere between 240MHz and 960MHz if required. NOTE: Code Recovery is not necessary unless you have cleared the code by accident and need to have the previous code restored. Code Clear

After successfully learned, LED will turn on and remains on when any button on Copy Remote is pressed, and the button on Copy Remote will function the same as Original Remote, the clone procedure is now complete. Code Recovery - Optional CAME / NICE / DEA Fixed Code Cloning Remotes at USD 2.0 - BFT / DITEC / LIFTMASTER / MERLIN / NICE SMILO / ATA Rolling Code Compatible at USD 5.0 - Details Simple 2 Step Programming Instruction How to Program (it's easy!) - we make two 433.92 MHz clone models and they have slightly different programming procedures - the included instructions will indicate which type once you complete Step 1. The first video has a shorter Step 1 reset (around 4 seconds). The second video has the model with a longer Step 1 reset (around 7 seconds) With this remote cloner you can clone all 433.92MHz fixed code key fobs. Some remotes that use this frequency are listed below. This is not a complete list! If your remote uses the 433.92MHZ frequency it will work with the remote duplicator ( note: rolling code remotes will not work) .