Once you have followed the previous steps, the coating of the garage floor is complete. Under normal use, the coating will last for approximately 4 years. After that it is advisable to renew the coating. In the meantime, you can easily maintain the epoxy resin floor.

How long does it take before you can walk on the garage floor? The coated floor is generally accessible after 24 hours. But be careful! Walkable means not passable. A car weighs considerably more than a person. Accordingly, the coating of the floor may be sufficiently cured for one person after one day. For a vehicle, this period is not enough. If you have had professional epoxy flooring done, you do not have to be concerned about it for at least 10 years or more. The coating is also useful for long-term protection of the floor. This protection can include various chemicals, oils, liquids, road salt and petrol. As a result, you benefit for a long time from an attractive and easy-care surface for your vehicle.

As always, you should follow the instructions in your epoxy kit. But, as a general rule of thumb, it’s best to paint small sections of epoxy at a time. Before moving on to the next section, evenly sprinkle color flakes over the entire section before the epoxy dries. Important: The floor must dry out completely after all cleaning work! An airtight plastic foil indicates condensation water if necessary. Freshly laid concrete floor needs at least 5 weeks to dry. Coating can then begin. Flexflooring operate around the UK, but we are based in Kent, so installations that require us to accommodate our workforce overnight will be more expensive. Quality of the sub-base Again, we recommend following the instructions that come with your specific epoxy kit. Though, if you’re looking for a basic overview on etching concrete, it usually entails three steps:

This is another important step to ensure the epoxy applies correctly (and stays). Etching solution usually comes as a powder that you mix with water. Most garage floor epoxy kits already come with an etching solution. This product should NOT be split. Taking smaller quantities from each tin, even if measured correctly, may cause issues with activating. As soon as a professional company takes over the coating of the floor, a few hundred euros are added. In the end you will pay about 1’000 Dollars for the complete coating of the floor with a professional. The price also varies depending on the layer applied, the area covered and possible travel costs. To coat the garage floor with epoxy resin, several work steps are necessary. These instructions have shown how advantageous such a coating can be and how it can best be applied and processed. Especially in cold winters, the easy-care and robustness of the epoxy resin floor is evident. Depending on the circumstances and the condition of the sub-base, epoxy can be installed incorporating fillers or as a floor coating. The nature of the epoxy resin makes the floor strong, durable, easy to maintain and aesthetically pleasing. What influences epoxy flooring cost?

There are two types of epoxies commonly used today. Water-based epoxy and 100% solids epoxy. 100% solids epoxy This depends on the kind of top-coat paint you’re using. Some paints will require a primer, and some don’t – though for the very best jobs, a good-quality primer is usually recommended.