At For over 20 years the BarraCuda family has delivered super-reliable storage for the hard drive industry. Seagate Barracuda ST2000DM008 2TB 3.5-Inch 6Gbps 7.2K RPM 512e SATA Hard Drive - Brand New Specifications Each line must contain only the serial number, a comma, and a model or part number followed by a new line.

ST2000DM008-2FR102 with Firmware 0001 - SMARTHDD Parameters of ST2000DM008-2FR102 with Firmware 0001 - SMARTHDD

Maak een einde aan de kosten en complexiteit van het opslaan, verplaatsen en activeren van gegevens op schaal. If it doesn't work out, should i plug into other SATA port? Is there a risk of plugging into different SATA port? It's not dropping too much when i transfer to another HDD, it was stable with 100-120mb/s then it dropped to 70mb/s for 3 sec so i don't have any issue when i transfer files from new to old/old to new. It's now 84/67/0/00000E144E09 (While i'm playing the game) Lyve: Periferie-naar-cloudplatform voor massaopslag Lyve Cloud: Voordelige objectopslag, ontworpen voor de multicloud Yes, make sure your SATA plugs are not loose first, then the SATA power plugs just so we can narrow down some stuff.Seagate Barracuda ST2000DM008 2TB / 2000GB 3.5" 6.0 Gb/s 7200 RPM 512e Advanced Format SATA / Serial ATA HDD / Hard Drive - Brand New Enter one serial number and one model or part number per line. Please, do not enter more than 5 lines. If you enter more than 5, your results will be truncated. No problem. I've had this problem before with a Toshiba drive where it would drop to 0 MB/s and hold it there, due to a damaged to the disk platters. It might seem that your drive is failing. The Read Error Rate value is really low, since you don't want it close to normalize which is 67 for yours, and from the screenshot it is at 74. The other clue is that the Hardware ECC Recovered value is really high.

3.5 HDD DATA SHEET - Seagate

Are you sure about it? What about this? : https://imgur.com/a/t9vFjSK (It's the old one and i think it has worse Read Error Rate than new one.) Hello, 2 days ago i bought new HDD for big size games and i'm not sure if its a problem with HDD but it's really weird and i can't find any other solutions.That is a healthy drive with the Error Rate, from what I've read the first 16-bit in the raw value tells you the drive errors for Seagate. If it is all zeros, you are fine. But your 2TB drive has a high Hardware ECC Recovered which is more concerning.