If using the MKW with the Select XLS panel range the SMART-R function of the XLS panel will be bypassed. The thermostat will have to be hard-wired directly to the heater as well as the mains. (It is not possible to pair wirelessly with the panel). Pundmann water heaters are designed for off road, on the road and off shore adventure. Perfect for boats, campervans, motorhomes , caravans, mountain top cabins, sandy shored beach huts, long distance lorry drivers, even the shed at the end of your garden.

The Herschel iQ MD2 Wired Thermostat is ideal for new builds / renovations where cabling can be neatly hidden whether it be for domestic or commercial applications. When used in conjunction with your wifi network and the SmartLife app, MD2 can also be controlled remotely via the internet, enabling you to manage your heating when you are away from the building. Note: Herschel iQ controls will only work with Herschel heaters. T he MD2 thermostat is not compatible with Remote models. Little miracle of heating. Sits under my computer desk and gently and fairly quietly blows some heat around me sitting pretty close by. Actually if you put your hand down in front of it you can really feel the heat so it makes me laugh it's that amazing or something. Not sure about the thermostat though. It does work but there seems a wide temp range between it switching on/ff so not so accurate but basically it mostly stays always on in any case. USB supply is 10w so handy and useful. MD2 is wired directly to the mains circuit and to the heaters and requires recessing into the wall.The R2 Receiver must be wired to the mains electricity supply and also to the Herschel heater(s). The T2 and R2 are paired wirelessly to each other and the R2 can also be paired to your wifi for SmartLife app control (if required). The stainless-steel water tanks are all fully insulated, water is heated to 65°-70° in round an hour. The PIR Sensor works with Herschel Wifi-enabled thermostats to give you extra energy savings on your heating based on room occupancy when the heating is on. (Why have the heating on full blast in a room noone is in?).

The PIR sensor must be used in conjunction with a Herschel Thermostat, it will not control your heating just on its own. A fish tank heater is an essential piece of aquarium equipment to help you make sure the water in your tank is the optimal temperature for your fish or any other wildlife living in it. Many aquarium heaters are designed to sit in the tank itself, but you can also get external heaters that can attach to your tank from the outside. The best aquarium heater for you will depend on the size of your tank and how much other equipment is in there - alongside a fish tank heater, you’ll also need a pump and a filter as a minimum. As another example, you can also use it to keep the heating on if (for example) you are working late in a room that usually turns its heating down earlier in the evening. Pundmann water heaters provide hot water on the go. The options for power are flexible and are offered in a range of combinations , including a hot air heat exchanger from an additional diesel heater, and 12v or 230v heating elements.Not home? The Touch Screen Control Centre can also be controlled remotely through the Smart Life App, so no matter where you are, you will always have full control over your infrared heating. If using the MKS with the Select XLS panel range the SMART-R function of the XLS panel will be bypassed. The thermostat will have to be hard-wired directly to the heater as well as the mains. (It is not possible to pair wirelessly with the panel). The award-winning design of the Herschel iQ MKW Mains Powered WiFi Thermostat is ideal for new builds / renovations where cabling can be neatly hidden whether it be for domestic or commercial applications and can control temperatures of up to 45°C. When used in conjunction with your WiFi network and the SmartLife App, MKW can run in fully programmable ‘Smart Mode’ enabling you to manage your heating as efficiently as possible whether you are home or away.

We recommend you install a thermostatically controlled mixer tap to dispense your water at a safe 40°- 45°C allowing even a modest tank of warmed water to go a long way. Water can be heating up whilst your underway and with the benefits of solar or wind charging of your 12v battery warm water can keep on flowing. Not home? The Four Scene Control can also be controlled remotely through the Smart Life App, so no matter where you are, you will always have full control over your infrared heating. Easy to install it is perfect for installations where hard wiring to the MD2 Thermostat would be impractical (for example, if you wish to minimise chasing out walls/cable trunking). The Touch Screen Control Centre is wired directly to the mains circuit, and must be installed within range of a 2.4Ghz WiFi network. The Touch Screen Control Centre is designed to operate with Smart Life Scenes, so no wiring directly to the panel or thermostats is required.

With its award-winning designer finish and smart, flexible control via the SmartLife App, the Herschel iQ MKS Mains powered WiFi Thermostat provides the ideal choice for control of your infrared heating system. Perfect for new builds and renovations where cabling can be neatly hidden whether it be for domestic or commercial applications and can control temperatures of up to 45°C. When used in conjunction with your WiFi network and the SmartLife App, MKS can run in fully programmable ‘Smart Mode’ enabling you to manage your heating as efficiently as possible whether you are home or away. A T2 must be used even if SmartLife app control is to be the primary means of controlling your heating (i.e. you cannot use just the App and R2).