You have to seriously consider the weight limit of the tree straps you are using to hang your swing. The rated weight given by most tree swing strap suppliers is the maximum weight at a 90 degree angle to the horizon. This means you can put the rated load on the strap when it is hanging straight down from the tree. Eye bolts: Drill vertical holes through the tree limb to permanently affix the bolts. This method can harm the tree but eliminates the problem of friction. If you’re not sure about the stability of your tree, have it inspected by a professional landscaper or arborist. Attachment points are very important to consider. You can have a strap that is very strong, but an attachment point that is weak. When looking at straps, pay close attention to how the attachment point is constructed and what it is made of.

Ropes and chains tend to tear into tree branches, causing damage to the branch. Tree swing straps help to distribute the load across a wider area. Also, straps lay flat on the branch which also helps to lessen damage to your tree. What features should you look for in tree swing straps The kit contains two straps, two carabiners, and a spinner to make it easy to install tree swings. Each strap has a maximum capacity of 2,200 LBS, making the straps an ideal option for saucer and patio swings. Overall, you can enjoy the durability of the hanging strap and the rope that is designed to last for a long time. The straps can withstand all weather and harsh elements without warping or coming undone. You won’t have to worry about rust on the carabiner hooks as they are made of industrial-strength steel.There are wax based coatings for rope that can be applied to your straps if you want to make it waterproof. Weight limit Metal chain is the strongest option but will damage your tree if wrapped around the branch. Use with heavier swings like benches, attached to hanging straps or eye bolts. You can remove the straps at any time for storage. It is easy to take down outdoor swings before winter. For the most part, tree swing straps can be used for any kind of swing. But there are special features added to some to aid in hanging certain types of swing. Heavy-duty tree straps take away the need to install mounting gear on tree branches or beams where a swing goes. Also, it saves several hours that go into the installation of tree swings.

Natural-fiber ropes absorb moisture and will rot over time, so should be replaced every year or two. Never use polypropylene to hang a swing unless it is coated with a UV resistant material. Unprotected polypropylene will break down within days of constant UV exposure. Tree swing straps make hanging swings easier. Hanging a swing before tree swing straps were invented required figuring out how to tie a rope properly around a tree or boring holes through a branch and inserting bolts with eye hooks. Moreover, straps do not require a lot of preparation when you decide to hang an outdoor swing for your little ones. Why are Tree Swing Straps a Good Alternative to Hangers? Your straps will come with some way of attaching your swing to them. This attachment type can be as simple as a loop in the end of the strap or as sophisticated as a swivel.Tree swing straps do not need expertise for the installation, unlike hangers, where you need to know how to operate a swing. Polyester will generally last for up to 12 months in direct sunlight before losing approximately 40% of its strength. Temperature The manufacturer claims that it will take less than two minutes to install the straps over a tree branch or a beam. Overall, it takes less than five minutes to wrap a strap around a tree branch or top beam. It will take less than five minutes to install each strap at the location of your choice. You can install the straps onto a tree branch or a beam, whatever works best for you.