Start casting: pour an even layer of a small amount of mixture. Tap the mold and use a brush (if you’re painting, use a separate brush) or a cotton bud to make sure there are no air bubbles and gaps between mold edges. Our Christmas starter kit is the perfect way to wow visitors this festive season as they see your unique handcrafted Christmas décor. We’ve all looked at our homes in a different way recently and many people have found ways to add a little colour, personality, and sparkle to the everyday. Now, you can do it especially for the magical time of year. The Christmas tree or star moulds can be used to make gorgeous Christmas tree decorations or to simply decorate your home this wonderful season! Jesmonite AC100 can be used both internally and externally, although external use requires the application of a suitable sealer or external paint system for long-term exposure. It is fire-resistant, having achieved a Class '0' fire rating under UK Building Regulations BS476 (Parts 6&7). Due to its solvent free formulation, AC100 can be cast without damage to rubber moulding compounds, and without limitation to scale. It is also dimensionally stable due to low exothermic reaction, and produces a small amount of expansion on set (1mm/ linear metre). Skil dig ud med dit helt eget, unikke touch til hjemmet! Med et Jesmonite DIY starter kit kan du kreere din egen personlige lysestage, der tilføjer en smule ekstra varme og personlighed til ethvert rum. Vi gør det legende let at dykke ned i DIY-verdenen, og med dette kit får du alt, hvad du behøver for at komme i gang. Supplied with a range of ancillary products including glass reinforcements, pigments, fillers, and control chemicals to adapt the material to the widest range of applications.

versatile: can be used for crafts, sculptures, molding, but also as a painting surface and jewelry! Time to de-mould your beautiful creation! Once you have taken it out of the mould, it will gain its full strength after 24 hours. Jesmonite needs all the moisture to evaporate to gain its strength so leave it to dry!Normal casting and laminating requires a mix ratio of 2.5 parts AC100 Powders to 1 Part AC100 Liquids, by weight.

Mix one pigment with liquid resin if you need a dense uniform color. If you want to experiment, swirl color pigments in a premixed (liquid + powder base) mixture. For fine crafts and interior design resin, plaster, or concrete are jesmonite alternatives. In construction, it can be replaced by polyesterandfiberglass. Jesmonite komponenter: Med 100 gr vandbaseret akrylistisk lim og 250 gr basepulver er du godt på vej til at lave minimum 2 støbninger.

You might also like…

Carefully and gently remove your creation from the mould in one fluid motion. If you stop and start, you could cause marks on your piece. Jesmonite takes around 24 hours to fully set but don’t leave your piece in the mould for that long. Leaving your piece in the mould for too long could cause sweating within the mould, meaning your creation will be left with marks. Set your piece on top of the mould to cool. As with baking, this will allow air to get to every part of your creation, not just the top. They are all sold in small bottles but don’t be discouraged, you really won’t need much. As Jesmonite official designers suggest using only 20 g of the pigment per one kilo of the jesmonite mixture. And one kile it’s a lot: it will be enough to make 7 coasters! Jesmonite may be an alternative to epoxy resin projects, especially if we consider the price. However, Jesmonite is more opaque than epoxy and doesn’t have a glossy finish until you polish it.